Download Print this page

Razor W13113202025 Quick Start Manual

Download this manual

Required Tools: (Not included)

A. 3 mm Allen wrench

B. Flat screwdriver

WARNING

CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect

charger before conducting any assembly or maintenance procedures. Failure to follow these

steps in the correct order may cause irreparable damage.

Step 1

Using a 3 mm Allen wrench, loosen the set screw from

the throttle. Slide throttle away from the grip.

Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.

REPLACEMENT PROCEDURES

Step 2

Insert a flat screwdriver between the handle and grip.

Apply a few drops of WD40

remove the grip, do the same for the other side.

POWER A5

HANDLEBAR GRIPS

PART # W13113202025

or soapy water to help

Page 1 Apply a few drops of WD40 or soapy water to help ® remove the grip, do the same for the other side. Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
Page 2 Step 3 Reverse the steps. ATTENTION: Charge battery 10 hours before using. Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.

Power a5