Snmp Traps - D-Link DES-2212 User Manual

SNMP Traps

The switch sends out SNMP traps to network management stations whenever
certain exceptional events occur, such as when the switch is powered on or
when an SNMP request is made using an unknown community name. The
switch allows traps to be routed to up to four different network management
hosts.
Figure 6-14. SNMP Trap Manager Configuration Menu
The following trap parameters can be set:
IP Address: gives the IP address of the network management station
to receive the trap
SNMP Community String: determines the SNMP community name
to be included in the trap request.
Status: determines whether this trap entry is valid or invalid. You can
delete an entry by changing its status to Invalid.
Using the Console Interface
User's Guide
37