Page EN-12
Operation
Operation
The control panel
(9)
(10)
(9)
Wine refrigerator switch on/off
(10)
Switch light on/off
(11)
Select temperature zone (top/bottom)
(12)
Temperature indicator
Before getting started
– Read the „Safety" chapter from page EN-4.
– Set up and connect the appliance as de-
scribed in the chapter „Start-up" from
page EN-19.
Key tones
Each time you press one of the keys num-
bered (9) to (11) and (13) to (15), you will hear
a beep. This tells you that the appliance has
registered your keypress.
Door alarm
If the door is not closed more than 1 minute,
it will sound beep for 10 seconds to remind. If
still not closed, it will beep again after 1 minute.
(11)
(12)
Switching the appliance on
and off
Switching on for the first time
• If you have not already done so, insert the
Switching on
• Press the
(13)
(13)
Increase temperature
(14)
Reduce temperature
(15)
Change temperature unit between
C
F
Celsius and Fahrenheit.
mains plug into an easily accessible and
properly installed socket (220–240 V~ /
50 Hz).
A beep will sound.
The temperature indicator
show the current internal temperatures,
– left for the upper zone,
– right for the lower zone.
You will hear the compressor start to work,
and the appliance will begin cooling.
The appliance is switched on.
key (9).
A beep will sound.
The temperature indicator (12) will show
the current internal temperatures,
– left for the upper zone,
– right for the lower zone.
You will hear the compressor start to work,
and the appliance will begin cooling.
The appliance is switched on.
(14)
(15)
C
F
(12) will
Need help?
Do you have a question about the HWC46ECIA and is the answer not in the manual?