Operation; Before Getting Started; Key Tones; Switching The Appliance On And Off - Hanseatic HWC86ECBA User Manual

Page EN-12

Operation

Operation
(5) (6)
(5)
Key "On/Off"
(6) Key "Light on/off"
(7) Temperature indicator

Before getting started

– Read the "Safety" chapter from page EN-4.
– Set up and connect the appliance as
described in chapter "Start-up" from
page EN-19.

Key tones

You will hear a beep each time you press one
of these keys: (5), (6), (8) and (9). This tells
you that the appliance has registered your
keypress.
Switching the appliance on
and off
Switching on for the first time
• If you have not already done so, insert the
mains plug into an easily accessible and
properly installed socket (220–240 V~ /
50 Hz).
(7)
(8) Key "Increase temperature"
(9) Key "Decrease temperature"
The temperature indicator will show the
current temperature in the appliance.
You will hear the compressor start to work,
and the appliance will begin cooling.
The appliance is switched on.
The key lock is activated the first time it is
switched on.
Switching on
• Press the key (5).
A beep will sound.
The temperature indicator (7) will show the
current internal temperature.
You will hear the compressor start to work,
and the appliance will begin cooling.
The appliance is switched on.
Switching off
• Press the key (5).
The temperature indicator (7) will go out.
The compressor will not work and the ap-
pliance will stop cooling.
The appliance is switched off.
(8) (9)
° C ° F