Download Print this page
Lutron Electronics CAR-15-GFST Series Manual
Lutron Electronics CAR-15-GFST Series Manual

Lutron Electronics CAR-15-GFST Series Manual

15 amp tamper-resistant gfci duplex receptacle in light almond

Advertisement

Quick Links

Lutron
Lutron Tamper Resistant, Self-Testing
GFCI Receptacles
Features
• Continuous self-test functionality – disconnects power to
receptacle if critical components are damaged and GFCI
protection is lost – providing "continuous self-testing"
that initiates within 2.5 seconds and is a continuous
cycle every 30 seconds or less.
• Three provisions for providing protection:
- Continuous electronic sensing, testing and evaluation
utilizing diagnostic software located on the printed
circuit board.
- Traditional testing mode by manually operating the
"test and reset" buttons utilizing a supervisory circuit as
specified in UL
943 section 5.15.
®
- Auto-sensing mode for immediate interruption for a
ground fault condition for Class A protection
(4 – 6 mA).
• Manual Test – this design incorporates a full system test
function. The GFCI, when manually tested, induces a
simulated ground fault leakage current to the printed
circuit board. This in turn causes the mechanical system
to react based on the action of the solenoid. The entire
mechanical and electronic GFCI system is reviewed for
functionality.
• Reverse wire safety feature – if wired incorrectly there will
be no power to the face or to downstream receptacles
for added safety.
• Clear visual indication of GFCI status —
LED indicating lights:
- Green LED (power to the device)
- Red LED (trip condition / ground fault condition)
- Flashing Red LED (end of life)
• Permanently installed internal tamper-resistant shutter
mechanism capable of resisting insertion of foreign
elements into the device.
• Internal back wiring clamp and guide pocket — quick
and dependable termination.
• Receptacle face compatible with NEMA designer and
NovaT* designer-opening wallplates.
• Compliant with NEC
®
S P E C I F I C AT I O N S U B M I T TA L
Job Name:
Job Number:
GFCI – Tamper Resistant, Self-Testing
406.12 and NEC
517-18(c).
®
Model Numbers:
Models Available:
15 A
CAR-15-GFST-XX
SCR-15-GFST-XX
NTR-15-GFST-XX
20 A
SCR-20-GFST-XX
NTR-20-GFST-XX
(XX in model number represents color / finish code)
Receptacles
369964c 1 10.26.21
15 A 125 V~ 60 Hz
15 A 125 V~ 60 Hz
15 A 125 V~ 60 Hz
20 A 125 V~ 60 Hz
20 A 125 V~ 60 Hz
Page
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the CAR-15-GFST Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Lutron Electronics CAR-15-GFST Series

  • Page 1 Lutron GFCI – Tamper Resistant, Self-Testing Receptacles 369964c 1 10.26.21 Lutron Tamper Resistant, Self-Testing GFCI Receptacles Features • Continuous self-test functionality – disconnects power to receptacle if critical components are damaged and GFCI protection is lost – providing “continuous self-testing” that initiates within 2.5 seconds and is a continuous cycle every 30 seconds or less.
  • Page 2 Lutron GFCI – Tamper Resistant, Self-Testing Receptacles 369964c 2 10.26.21 Specifications Regulatory Approvals Electrical • Meets UL 943 Class A GFCIs and UL • Trip Level: 4 – 6 mA ® ® for receptacles • Trip Time: .025 seconds (nominal) •...
  • Page 3 Lutron GFCI – Tamper Resistant, Self-Testing Receptacles 369964c 3 10.26.21 Dimensions Front View NTR- models (with NovaT* wallplate) CAR- and SCR- models (with Claro wallplate) Bulk unit 4.56 in 4.69 in 3.28 in (116 mm) (119 mm) (83.3 mm) 2.75 in 2.94 in 1.75 in (70 mm)
  • Page 4 Lutron GFCI – Tamper Resistant, Self-Testing Receptacles 369964c 4 10.26.21 Wiring Diagrams (choose one or the other) A: One cable entering the box B: Two cables entering the box Grounding connection LINE cable brings to box (if box has a LINE cable brings power to the GFCI grounding terminal)
  • Page 5 Lutron GFCI – Tamper Resistant, Self-Testing Receptacles 369964c 5 10.26.21 Colors and Finishes Colors and Finishes Gloss Finishes Satin Finishes Ivory Brilliant White Glacier White Snow Architectural White White Almond Light Almond Lunar Gray Mist Pebble Cobblestone Gray Brown Slate Midnight Biscuit Sand...
  • Page 6 Satin Colors: SC-CK-1 (while supplies last) The Lutron logo, Lutron, Claro, Satin Colors and NovaT* are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the US and/or other countries. All other product names, logos, and brands are property of their respective owners.

This manual is also suitable for:

Scr-15-gfst seriesNtr-15-gfst seriesScr-20-gfst seriesNtr-20-gfst seriesCar-15-gfst-laCar-15-gfst-wh