Lutron Electronics RadioRA RALK-2W-SD Manual

Installation Instructions for
Large Button Master Control
Button Kits
Please Leave for Occupant

Overview

The RadioRA Large Button Master Control Button
®
Kits allow the customization of RadioRA Large Button
Master Controls. Button Kits may be used to change
the color and add engraving to clearly identify each
button's function.
Read all instructions completely before
installation.

Important Notes

Note: Use only Lutron wallplates with these
devices. Non-Lutron wallplates will NOT sit
flush against the wall.
Mounting: Ensure all controls are correctly wired and
mounted before installing button kits or wallplates.
Ensure controls are free from debris (e.g. plaster,
spackling compound) before installing button kits or
wallplates.
Wallplates: Lutron Claro
wallplates are recommended for best color match and
clean aesthetic appearance. Do not paint button kits
or wallplates.
Cleaning: To clean, wipe with a clean damp cloth.
DO NOT use any chemical cleaning solutions.
2 Button Master Control Programming: To program
a 2 Button Master Control, install the Programming
Button Kit (RALK-PGM), make the programming
changes, and then reinstall the 2 button kit. Retain
the Programming Button Kit to make future
changes.
and Satin Colors
® TM
Large Button Master Control
Button Kits
RALK-2W-SD, RALK-5W-RL,
RALK-5W-AO, RALK-PGM
RALK-2W-SD
RALK-5W-RL
RALK-PGM
RALK-5W-AO
1