Table of Contents
Advertisement
Quick Links
EcoRoam 10
Models: GDI-EXRMP100...120
User Guide
Control Buttons & Operations
On / Off
PRESS & HOLD the Power Button
for
3-5 seconds to turn it On / Off.
Wireless Pairing of Two Speakers
This functionality is ONLY available with
two EcoRoam 10 speakers. Refer to
Wireless Stereo Connection of Two Speakers for details.
Play / Pause / Answer
Press
once to pause & play song tracks and to answer
incoming mobile calls.
Advertisement
Table of Contents
Related Manuals for EcoxGear EcoRoam 10
Summary of Contents for EcoxGear EcoRoam 10
- Page 1 PRESS & HOLD the Power Button 3-5 seconds to turn it On / Off. Wireless Pairing of Two Speakers This functionality is ONLY available with two EcoRoam 10 speakers. Refer to Wireless Stereo Connection of Two Speakers for details. Play / Pause / Answer Press once to pause &...
-
Page 2: Track Selection
Power and Connections Fully charge your EcoRoam 10 BEFORE you power on for best performance. Connect the USB INPUT to the USB micro cable and a power source to charge your EcoRoam 10. When charged, PRESS & HOLD the Power Button to power On / Off the EcoRoam 10. - Page 3 EcoRoam 10. After the AUX-IN cable is plugged in, the LED indicator will shine solid GREEN. NOTES: • Track Selection must be controlled from the audio device when connected to the AUX-IN connection. • When using the AUX-IN connection, the VOLUME control is NOT synced to your phone.
- Page 4 Connecting With Bluetooth: Connect To Your Smart Device & Play Audio When your EcoRoam 10 is turned on, the LED light on the front will flash BLUE, indicating the unit is powered on and ready to pair. The unit shall also emit tones when powered on.
- Page 5 Bluetooth Section within the device currently connected to the EcoRoam 10 and delete the ECOXGEAR Bluetooth selection from your phone. The EcoRoam 10 will then be available to pair & connect to an alternate “ECOXGEAR” Bluetooth connection. To disconnect the speaker, you can also PRESS & HOLD The speaker will emit tones once it has disconnected from your Bluetooth device.
- Page 6 Wireless Stereo Connection of Two Speakers First Time Pairing Two Speakers When you have two EcoRoam 10 speakers and want to wirelessly pair them for stereo sound, power on the two units. Next, DOUBLE-CLICK the Play Button on each speaker.
-
Page 7: Auto Re-Pairing Of The Same Two Speakers
Auto Re-Pairing of the Same Two Speakers Power on the two EcoRoam 10 units. Wait approximately 3-5 seconds and speakers will automatically re-pair to each other. The speakers will emit tones and the LED Indicator light will turn solid BLUE on one unit, while the LED indicator on the other unit will flash BLUE. -
Page 8: Specifications
Specifications Unit Dimensions Mount Attachment Point 4.54” 3.06” 3.06” Unit Weight Power Source 9.8 ounces 3.7V, 1800mAh Lithium Battery Output Power USB Input RMS 5W (5 Watt mono 5V, 1.0A speaker / 4 ohms) Frequency Range S/N Ratio 20Hz-18,000Hz 90dB +/- 3dB... - Page 9 Play Time Optional Accessories 15+ hours from full charge For Charging* at 75% volume level • AC (5V, 1A) USB Wall Outlet Power Adapter Charging Options • (5V, 1A) USB Car USB to adapter or computer Power Adapter Charging Time Bluetooth Approximately 3 hours Bluetooth®...
-
Page 10: Troubleshooting
TROUBLE SHOOTING: EcoRoam 10 speaker “locks up,” does not play audio, and/or will not connect to Bluetooth. It is uncommon for your EcoRoam 10 to “lock up”; however, the unit can be reset by pressing and holding the Power Button for 10 seconds. - Page 11 PRODUCT USE AND PROTECTION: Read and follow all instructions. Use only as intended. The ECOXGEAR Bluetooth speaker is intended to be used indoors or outdoors and in land or water environments. The speaker has been tested to IP67 waterproofing standards, which means the speaker can be submerged in up to 3 feet of water for 30 minutes without any damage.
- Page 12 Always make sure that the gaskets are sealed when in salt water environment and the unit properly rinsed off after use. 4.) Properly clean the ECOXGEAR and ensure the gaskets have no sand, dirt or water on them prior to storage or removing the back cover.
-
Page 13: Care, Maintenance & Precautions
6.) Completely dry and clean your ECOXGEAR prior to attempting to charge the unit. 7.) Return the ECOXGEAR to Grace Digital if you suspect water ingress into the unit or if the unit has experienced a severe impact that may have affected the integrity of the unit to take on water. -
Page 14: Limited Manufacturer's Warranty
12.) Do NOT remove the built-in battery. Do NOT remove the grill covers. LIMITED MANUFACTURER’S WARRANTY: EcoRoam 10 is covered by a 1-year limited warranty that covers defects in workmanship and / or materials for a period of 1 year from original purchase date. This warranty does not apply to any products which have been abused, neglected, modified or used for a purpose other than the one for which they were manufactured.
Need help?
Do you have a question about the EcoRoam 10 and is the answer not in the manual?
Questions and answers