Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for EcoxGear GDI-EXEJ300
Summary of Contents for EcoxGear GDI-EXEJ300
- Page 1 EcoJam Models: GDI-EXEJ300 / 301 User Guide...
-
Page 2: Quick Start
Quick Start Control Buttons & Operations On/Off Open Cap on the back of your EcoJam Press the Standby Power Button once to power ON/OFF. Turn on the Main Power Switch IMPORTANT: Standby Power function Press the Standby Button to will NOT operate when the Master power on your EcoJam Power is set OFF. -
Page 3: Set Up Recommendations
Set Up Your EcoJam will beep to indicate when maximum volume setting is reached. Recommendations 1-2-3 Track Selection Charge Your EcoJam Press button once to select Previous Song track & Next Song track Before you power on your EcoJam Play/Pause for the FIRST TIME, for best performance, connect the USB Micro Press button once to pause &... - Page 4 Lower OFF position, your connections shall appear. Select the EcoJam will not be able to turn on ECOXGEAR speaker from the list of using the Standby Button. discovered devices on your Bluetooth device. Wait for a few seconds until the NOTE: The LED battery level connection is completed.
- Page 5 Once connected, select and play your to learn how to add and pair a new desired audio. device (EcoJam for instance) to your Smartphone using Bluetooth. Pairing Mode: If the LED is not flashing or if you wish to place your EcoJam in Bluetooth Pairing &...
- Page 6 Master Power Switch Important: Maintaining & Connections Waterproofness To access the If the cap on the back panel is connections, not properly closed, the unit is turn the cap to NOT watertight. the LEFT so the To ensure the unit is watertight & cap’s arrow point waterproof, ALWAYS CLOSE THE lines up with the...
-
Page 7: Back Panel: Functions
Back Panel: Functions Audio AUX-IN Connect an audio device using the 3.5mm cable connection as an alternative to a Bluetooth connection to your EcoJam. NOTE: Volume level must be controlled from the audio device when connected to the AUX-IN connection. Input Connect the USB cable to the USB micro Input to charge your EcoJam. -
Page 8: Specifications
Output Power Source Bluetooth 3.7V, 2800mAh Bluetooth ® CSR 4.1 Connect to the USB Output (5V, 1A) port to Lithium Battery Recommended charge your personal device. Use the USB Storage (Battery) USB Input / cable included with your personal device. Temperature Output NOTE: Charging rates are similar to the... -
Page 9: Optional Accessories
Read and follow all instructions. Use only as intended. AC (5V, 1A) USB Car Power Adapter The ECOXGEAR Bluetooth speaker is intended to For Mounting be used indoors or outdoors and in land or water environments. The speaker has been tested to IP67 Suction Cup Mount (¼”... - Page 10 Towel dry the unit AND make sure all Do not attempt to mount the unit except with the connections are dry BEFORE plugging approved ECOXGEAR mounts. Doing so could cause in the charging connector. Failure to do damage to the unit allowing water to ingress. A unit...
-
Page 11: Care, Maintenance & Precautions
You should always 2) Never use your ECOXGEAR if you have dropped 1) Use the ECOXGEAR speaker in accordance with it or thrown it against a hard surface which any music or noise rules and regulations. -
Page 12: Limited Manufacturer's Warranty
10) Power and / or charge the built-in rechargeable manufacturer. Please visit www.ecoxgear.com for battery for portable use by connecting the additional product & warranty information. USB cord to a computer USB connection or to an AC outlet using the AC-to-USB cord 5V, 1A power adapter intended for use with the unit.
Need help?
Do you have a question about the GDI-EXEJ300 and is the answer not in the manual?
Questions and answers