Subscribe to Our Youtube Channel
Related Manuals for Eizo CuratOR LX2420-T
Summary of Contents for Eizo CuratOR LX2420-T
- Page 1 Instructions for Use 2MP 23.8" LCD Monitor Important Please read the safety information and all information delivered with the product carefully to familiarize yourself with safe and effective usage.
-
Page 2: Legal Information
Use of EIZO products WARNING EIZO products may only be used for the applications described in the catalog and in the relevant tech- nical documentation. If products and components from other manufacturers are used, these must be recommended or approved by EIZO. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems. -
Page 3: Table Of Contents
7 Operation ........................ 24 Operator controls .................... 24 Lock or unlock OSD menu .................. 25 Overview of the OSD menu ................... 26 "Image" menu...................... 27 "Geometry" menu .................... 29 "Power Manager" menu .................. 31 CuratOR LX2420-T Instructions for Use, 07/2024... - Page 4 12.4 China RoHS (Restriction of Hazardous Substances).......... 50 12.5 Declaration of compliance with India RoHS ............ 51 12.6 Environmental protection .................. 51 12.7 Additional devices .................... 51 12.8 Warranty......................... 51 12.9 Repairs........................ 52 12.10 Contact........................ 52 12.11 Trademarks ...................... 52 CuratOR LX2420-T Instructions for Use, 07/2024...
-
Page 5: Introduction
1.2 Intended use Intended purpose The CuratOR LX2420-T is intended for the display of still images and moving images from various commercially available devices commonly used in a medical environment, in partic- ular radiology. The monitor is optimized for the reproduction of grayscale X-ray images. The monitor is not suitable for mammography. -
Page 6: User Groups
Cleaning staff "Cleaning staff" refers to personnel responsible for cleaning medical devices. CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 7: Safety Information
2 Safety information 2.1 General safety instructions Correct and safe operation of EIZO devices assume professional transport, storage, installa- tion, and connection, as well as careful operation and service. The devices may only be used for applications for which they are intended. - Page 8 Only use power cables approved for China. These power cables are identified by the labels "CCC" or "CQC". Observe the country-specific regulations Observe all regulations of the country in which the device is used. CuratOR LX2420-T Instructions for Use, 07/2024...
- Page 9 If the device is brought into a room with a higher or rising temperature, condensed water will form in and on the device. Do not switch on the device until the condensed water has evaporated. Other- wise, the device could be damaged. CuratOR LX2420-T Instructions for Use, 07/2024...
- Page 10 Note that monitors can fail as a result of aging, and that image properties such as brightness, con- trast,and color value can change. Do not touch the monitor screen Due to mechanical pressure or electrostatic discharges, touching the screen can result in brief distur- bances to the image. CuratOR LX2420-T Instructions for Use, 07/2024...
-
Page 11: Product-Specific Safety Instructions
Note Image quality To maintain constant image quality, EIZO recommends cleaning the monitor on a regular basis and checking image properties in accordance with all applicable local regulations. CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 12: Description
Keep the packaging material for subsequent transport of the device. Device The CuratOR LX2420-T is a 2MP 23.8" LCD Monitor for installation in a ceiling or wall mount, or for installation in a stand. CuratOR LX2420-ST version has a reclining stand. - Page 13 The touch screen can easily be operated while wearing gloves for use in sterile environments. Full-flat Design The Full-flat design of the CuratOR LX2420-T allows you to touch the screen right to the edge. Reclining stand The tilt angle of the CuratOR LX2420-ST can be adjusted steplessly.
-
Page 14: Setup And Installation
With the CuratOR LX2420-ST, which is equipped with a reclining stand, the minimum distance to the back of the monitor can be less than 10 cm at some points, depending on the angle of inclination. However, this is sufficient for satisfactory heat dissipation. CuratOR LX2420-T Instructions for Use, 07/2024... - Page 15 Ensure that such mechanical influences are avoided. Movable installation If the monitor is installed such that it can move, make sure that persons or objects in the facility are not endangered by the monitor's range of movement. CuratOR LX2420-T Instructions for Use, 07/2024...
-
Page 16: Adjusting The Screen Angle
Mounts must be tested and approved by the manufacturer for the weight to be sup- ported. • An installed stand must be sufficiently stable to withstand tilting of up to 10° without top- pling the monitor. CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 17: Connecting
Device settings may only be adjusted by service personnel. NOTICE Disconnecting from line power Always set the power switch to "Off" before disconnecting the device from power. Other- wise the device could be destroyed. CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 18: Device Connectors
Means of isolating the device from mains supply is by disconnecting the AC power line. • Make sure that the AC power line is easily accessible. 5.2.1 Connector locations Main switch Keypad Power connector Signal inputs Grounding screw Fig.: Connector locations (rear view and side view) CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 19: Connection Panel
Main switch (behind keypad) The power switch is used to turn the device on and off. Standby switch (keypad) The standby switch is part of the keypad and is used to switch the device on and off. CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 20: Connecting The Signal Cable
The monitor has to be installed in the ceiling suspension, wall mount, or stand. Procedure 1. Connect the appliance plug to the monitor power connector. 2. The power cable can be secured using a cable grip. CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 21: Commissioning
This section describes how to adapt the monitor to operate with an analog video source. The procedure is divided into the following steps: • Adjust the position, phase and frequency. • Adapt brightness and contrast. CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 22: Adjusting The Position, Phase, And Frequency
The brightness and contrast must be adjusted for the respective graphics card in the system on site due to different output levels. Note The exact brightness and contrast settings are only possible with a photometer. Perform the following steps unless a specific procedure is specified for the system. CuratOR LX2420-T Instructions for Use, 07/2024... - Page 23 ð This is the optimum contrast value. 8. Exit the OSD to save the values. ð You have set the brightness and contrast for optimized display of the 5% and 95% squares of the SMPTE test pattern. CuratOR LX2420-T Instructions for Use, 07/2024...
-
Page 24: Operation
Main switch (behind keypad) The keypad is located on the side, the operating LED on the front. The operation LED illuminates when power is supplied to the device and the power switch is turned on. CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 25: Lock Or Unlock Osd Menu
Lock the OSD menu • In the OSD menu “Monitor Settings” under “OSD settings”, set the “OSD keylock” func- tion to “On”. The OSD menu then becomes locked once power to the monitor is cycled. CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 26: Overview Of The Osd Menu
• All signal inputs may be connected simultaneously. You can use the OSD menu to change monitor settings or display information about the monitor. The following sections present the menus and available settings. Fig.: Overview of the OSD menu CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 27: Image" Menu
Note: The function is available only if a LUT was activated with the “LUT” function. Blue 0 - 255 Change the values for the red, green, or blue proportion of the set color tempera- ture. CuratOR LX2420-T Instructions for Use, 07/2024... - Page 28 Reset the image parameter to the de- fault settings All settings made in the “Image” menu, ex- cept "Color Temperature", are reset to the defaults. The monitor settings and settings of the AD converter remain in place. CuratOR LX2420-T Instructions for Use, 07/2024...
-
Page 29: Geometry" Menu
Note The "Analog Adjustment" menu is only displayed if an image source is connected to the analog input. Function Values Description Brightness -99 … 99 Set brightness Adapting the representation of darker picture areas. CuratOR LX2420-T Instructions for Use, 07/2024... - Page 30 (with the identical monitor and graphics card settings). Reset ADC Reset analog settings If you perform this function, the brightness and con- trast values will be reset to the values after the final adjustment. CuratOR LX2420-T Instructions for Use, 07/2024...
-
Page 31: Power Manager" Menu
Power Save mode. Set this function to “On” if this occurs. Touch at Power Save Set whether touchscreen is active in Power Save mode. CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 32: Monitor Settings" Menu
"Geometry". OSD Settings: Orienta- Landscape Format tion Portrait Format OSD Settings: Start Up Logo when starting the monitor Logo The company logo is displayed when the monitor is started with the setting "On". CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 33: Information" Menu
Serial number • Power on time (h) • Backlight on time (h) • Input signal (resolution and signal frequency) • Mode (for analog signals only) • Temperature in the monitor [°C] • Firmware version CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 34: Cleaning And Check Settings
Incidin Oxy Foam undiluted Descogen Liquid undiluted Peridox RTU undiluted Incidin Oxy Foam S undiluted Pyridine derivatives Octenisept Alcohol Ethanol 96% Isopropyl alcohol 70% Cavi Wipes undiluted Petrol Petroleum benzine boiling range 100-120°C; CAS 64742-49-0 CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 35: Prohibited Cleaning Agents And Disinfectants
The picture quality of the monitor changes due to aging of the LCD unit and the backlight. • Check the monitor settings at regular intervals in accordance with the local guidelines. • Correct the settings if necessary. CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 36: Troubleshooting
Is there a heat source near the monitor? Picture is without contrast and The video source is only • Switch to "Monochrome (G)" in has a strong green shading transmitting a green signal the OSD menu. CuratOR LX2420-T Instructions for Use, 07/2024... - Page 37 Press Key 1 for enabling/dis- abling touch) • Check that the power cords of the monitor and PC are connected to a grounded main outlet. Failure to ground the equipment may result in malfunction. CuratOR LX2420-T Instructions for Use, 07/2024...
-
Page 38: Technical Specifications
Line frequency 50 ... 60 Hz (± 5%) Current consumption max. 0.5 A Maximum power consumption < 46 W Energy Saving Mode < 2 W (touch on) < 1 W (touch off) Power output supply USB-A 5V/500mA Hirose 5V 5V/1A CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 39: Inputs/Outputs
10.5 Controls and connectors Front • Operation LED Side • Keys for OSD menu • Power switch • Power connection socket • 1 DVI-I socket • 1 DisplayPort socket • 1 USB-B, 1 USB-A • 5 V connector CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 40: Mechanical Design
Humidity 10% to 90%, non-condensing 10.8 Safety specifications Safety standards • IEC/EN 60601-1 • CAN/CSA - C22.2. No. 60601-1 • UL60601-1 • GB 4943.1, fuse T3.15A 250V Protection class Protection class I Degree of protection IP20 CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 41: Dimension Drawings
Dimension drawings 11.1 Overview 11 Dimension drawings All dimensions in mm 11.1 Overview CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 42: Rear And Side Views
Dimension drawings 11.2 Rear and side views 11.2 Rear and side views CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 43: Appendix
Symbol for degree of protection according to DIN EN 60529. Symbol for alternating current at line voltage input. Symbol for protective ground (ground). "On" symbol (voltage). "Off" symbol (voltage). Symbol "Refer to the instructions for use". UK Responsible Person. Swiss authorized representative (CH-REP). CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 44: Information On Electromagnetic Compatibility (Emc)
60601-1-2. Electromagnetic radiation The CuratOR LX2420-T is intended for use in the electromagnetic environments noted be- low. Operators or users of the CuratOR LX2420-T have to ensure that the device is used in such an environment. Radiation test Conformity Information regarding the electromagnetic environment... - Page 45 The CuratOR LX2420-T was tested with the following compliance levels in accordance with the test requirements for professional healthcare facilities, as established in IEC/EN 6061-1-2. Operators or users of the CuratOR LX2420-T have to ensure that the device is used in such an environment. Interference im-...
- Page 46 • The ISM bands between 150 kHz and 80 MHz are 6.765 MHz to 6.795 MHz, 13.553 MHz to 13.567 MHz, 26.957 MHz to 27.283 MHz, and 40.66 MHz to 40.70 MHz. CuratOR LX2420-T Instructions for Use, 07/2024...
- Page 47 CuratOR LX2420-T based on the output power of the transmitter The CuratOR LX2420-T is intended for use in an electromagnetic environment in which in- terference due to electromagnetic radiation is controlled. For other portable and mobile RF...
- Page 48 CuratOR LX2420-T – tested immunity interference The CuratOR LX2420-T is intended for use in an electromagnetic environment in which in- terference due to electromagnetic radiation is controlled. The operator or user of the monitor can help prevent electromagnetic interference by maintaining the recommended minimum distance between portable and mobile RF communications devices (transmitters) and the CuratOR LX2420-T.
-
Page 49: Fcc Declaration Of Conformity
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note Use the specified cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. •... -
Page 50: China Rohs (Restriction Of Hazardous Substances)
(Hg) (Cd) (Cr(VI)) (PBB) (PBDE) 液晶纯平屏幕 LCD Flat Screen 控制板 Controller Board 电源 Power Supply 其他 电路板 Other Circuit Boards 其他（电缆等） Others (cables, etc.) 机架、底盘 Housing, Chassis 附件（信号电缆、输电线等） Acessories (signal cable, power line, etc.) CuratOR LX2420-T Instructions for Use, 07/2024... -
Page 51: Declaration Of Compliance With India Rohs
12.5 Declaration of compliance with India RoHS We, EIZO Corporation, hereby declare and guarantee that this product has been designed and manufactured in compliance with the E-Waste management rule 2016 which prohibit the inclusion of the following substances except for the exemptions listed in schedule II. -
Page 52: Repairs
12.9 Repairs 12.9 Repairs Please contact the sales partner from whom you purchased the product. The repair may only be carried out directly at EIZO or at a location expressly authorized by EIZO for this purpose. 12.10 Contact Support during installation and for technical questions www.eizo-or.com... - Page 54 Carl-Benz-Straße 3, 76761 Rülzheim, Germany Moosacherstrasse 6, Au, CH-8820 Wädenswil, Switzerland 1 Queens Square, Ascot Business Park, Lyndhurst Road, Ascot, Berkshire, SL5 9FE, UK Instructions for Use, 07/2024 CuratOR LX2420-T Copyright © 2024 . All rights reserved. 1086415-001...
Need help?
Do you have a question about the CuratOR LX2420-T and is the answer not in the manual?
Questions and answers