Download
Share
Print this page
Fisher & Paykel CONTEMPORARY Series Installation Manual
  1. Manuals
  2. Brands
  3. Fisher & Paykel Manuals
  4. Ventilation Hood
  5. Contemporary Series
  6. Installation manual

Fisher & Paykel CONTEMPORARY Series Installation Manual

Box wall rangehood
Hide thumbs Also See for CONTEMPORARY Series:

Advertisement

Quick Links

Download this manual
BOX WALL RANGEHOOD
CONTEMPORARY
HC24DCXB4, HC30DCXB4 & HC36DCXB4 models
INSTALLATION GUIDE
US CA

Advertisement

loading
Need help?

Need help?

Do you have a question about the CONTEMPORARY Series and is the answer not in the manual?

Questions and answers

Related Manuals for Fisher & Paykel CONTEMPORARY Series

Summary of Contents for Fisher & Paykel CONTEMPORARY Series

  • Page 1 BOX WALL RANGEHOOD CONTEMPORARY HC24DCXB4, HC30DCXB4 & HC36DCXB4 models INSTALLATION GUIDE US CA...
  • Page 2 SAFETY AND WARNINGS WARNING!  WARNING! Electric Shock Hazard Fire Hazard Failure to follow this advice may result in Failure to follow this advice may result in electric shock or death. serious burns or death. • Installation and electrical wiring must be •...
  • Page 3 SAFETY AND WARNINGS Stainless steel is very easily damaged during installation if abraded or knocked by tools. It is recommended to protect the top of the rangehood with cardboard or polystyrene during the installation to minimise the risk of damage occurring. To reduce the risk of damage occurring to the cooktop, it is recommended that the surface of the cooktop is protected with cardboard or a similar object during installation of the rangehood.
  • Page 4 COMPONENTS REQUIRED PARTS PARTS Keep all packing materials until the unit has been inspected. Not supplied Inspect the product to ensure there is no shipping damage. If any damage is detected contact the dealer or retailer you bought the product from to report the damage. Fisher &...
  • Page 5 PRODUCT DIMENSIONS | HC24DCXB4 DATUM: REAR OF PRODUCT Product Dimensions a Maximum height of rangehood* 40 3/4" 1035 B Minimum overall height - recirculating 26 9/16" c Minimum overall height 25" d Overall width of rangehood 23 9/16" 19 11/16" e Overall depth of rangehood f Height of canopy 2 3/16"...
  • Page 6 PRODUCT DIMENSIONS | HC24DCXB4 CEILING 1" 1” (25mm) 10" 10” (250mm) Product Dimensions a Lower rangehood attachment point width 16 9/16" B Lower rangehood attachment point height 1 7/16" c Upper rangehood attachment point height 11 1/4" 9 1/4" 9 1/4” d Chimney bracket attachment point height 22"...
  • Page 7 PRODUCT DIMENSIONS | HC30DCXB4 DATUM: REAR OF PRODUCT Product Dimensions a Maximum height of rangehood* 40 3/4" 1035 B Minimum overall height - recirculating 26 9/16" c Minimum overall height 25" d Overall width of rangehood 29 3/4" e Overall depth of rangehood 19 11/16"...
  • Page 8 PRODUCT DIMENSIONS | HC30DCXB4 CEILING 1" 1” (25mm) 10" 10” (250mm) Product Dimensions a Lower rangehood attachment point width 19 5/16" B Lower rangehood attachment point height 1 7/16" c Upper rangehood attachment point height 11 5/16" 9 1/4" 9 1/4” d Chimney bracket attachment point height 22 3/16"...
  • Page 9 PRODUCT DIMENSIONS | HC36DCXB4 DATUM: REAR OF PRODUCT Product Dimensions a Maximum height of rangehood* 40 3/4" 1035 B Minimum overall height - recirculating 26 9/16" c Minimum overall height 25" d Overall width of rangehood 35 3/8" e Overall depth of rangehood 19 11/16"...
  • Page 10 PRODUCT DIMENSIONS | HC36DCXB4 CEILING 1" 1” (25mm) 10" 10” (250mm) Product Dimensions a Lower range hood attachment point width 22 13/16" B Lower range hood attachment point height 1 7/16" c Upper range hood attachment point height 11 5/16" 9 1/4"...
  • Page 11 INSTALLATION HEIGHT Induction cooktop considerations Induction cooktops use energy efficient technology that only heats the contents of a cooking pot. Unlike gas or traditional electric cooktops, the surrounding air does not get heated when using an induction cooktop. As a result, rangehood filters, splashbacks and surrounding cabinetry do not get warmed up, increasing the likelihood of condensation on these cooler surfaces.
  • Page 12 VENTING REQUIREMENTS ELECTRICAL REQUIREMENTS Venting options Before connecting the rangehood to the power supply, ensure the voltage and frequency indicated on the rating plate match that of the installation location: Attention should be given to ensure that any applicable regulations concerning the discharge of exhaust air are fulfilled.
  • Page 13 INSTALL PREPARATION / CONSIDERATIONS Ducting options: Duct to roof and out external wall or Check for wall studs.* soffit. Duct to external wall and out. Ensure the space is set up to the correct specifications. Refer to ‘Installation height’ for details. Determine if a chimney extension is required.
  • Page 14 CHECK MATERIALS AND PARTS UNPACK PRODUCTS Open carton and remove all packaging. Carefully lift the products out of the Ensure the ducting is the correct length cartons. and compatible to the rangehood. Place on a protected surface. Dispose of packaging responsibly. Recycle where possible.
  • Page 15 PREPARE INSTALL LOCATION Centre rangehood over cooktop and ensure all required clearances are maintained. Check wall for studs. Using the guide shown, mark the upper and lower attachment points on the wall. Drill attachment holes. Wood: 1/8" (3mm) diameter hole. Drywall or no wall stud: 3/16"...
  • Page 16 INSTALL BRACKETS INSTALL DUCTING RIGID DUCTING Centre and secure the upper and centre chimney brackets using two 1 3/16" (30mm) self tapping screws per bracket. If a cornice is present: Ensure the ducting is the correct length and compatible to the rangehood. Move the upper chimney brackets lower to avoid cornice clashing with chimney Do not reduce the duct diameter as...
  • Page 17 INSTALL DUCTING RIGID DUCTING Fit ducting to the external vent and Cut ducting to length. secure. Route ducting and assemble. Tape ducting to seal. If required, secure ducting within ceiling.
  • Page 18 PREPARE HOOD INSTALL HOOD Install the 1 3/16" (30mm) upper hood Fit the duct adapter to the rangehood mounting screws* as per the product using two supplied Phillips screws. dimension page. Ensure both screws protrude 1/16" (2mm). 1/16" (2mm) Lift the rangehood and slot onto the two upper hood mounting screws.
  • Page 19 SECURE DUCTING CONNECT POWER Attach ducting to the adapter. Secure using tape, cable ties or metal Remove the junction box cover by straps as required. unscrewing both screws as shown. Ensure backdraft damper flaps are not obstructed by the ducting. Remove the electrical knock-out.
  • Page 20 WIRING DIAGRAM...
  • Page 21 INSTALL CHIMNEY Remove the protective film from all Remove the protective film from all chimney surfaces. chimney surfaces. Bend lower chimney tabs inwards using Bend lower chimney tabs inwards using pliers. pliers. Recirculation installations only: Align the chimney to the lower chimney Install the carbon filters onto the blower.
  • Page 22 INSTALLER CHECKLIST COMPLETE AND KEEP FOR SAFE REFERENCE TO BE COMPLETED BY THE INSTALLER Model Serial no. … Have all packaging been removed? Purchase date … Rangehood is correctly installed Purchaser Dealer address … All connections are secure Installer’s name …...
  • Page 23 FISHERPAYKEL.COM © Fisher & Paykel Appliances 2024. All rights reserved. The models shown in this guide may not be available in all markets and are subject to change at any time. The product specifications in this guide apply to the specific products and models described at the date of issue.

This manual is also suitable for:

Hc24dcxb4Hc30dcxb4Hc36dcxb4