CONTENTS Introduction Safety and warnings Installation instructions Operating instructions Cleaning and maintenance Parts and accessories Customer Care IMPORTANT! Registration SAVE THESE INSTRUCTIONS Register your product with us so we can The models shown in this user guide provide you with the best service possible. may not be available in all markets and are subject to change at any time.
INTRODUCTION Thank you for purchasing a Fisher & Paykel product. Thousands of hours go into the design, engineering, testing and perfecting of each Fisher & Paykel appliance. The care and attention given to creating these beautiful products doesn’t stop once it has found its home with you. This use and care manual will answer most of your questions about the set-up, use and on-going maintenance of your Fisher &...
SAFETY AND WARNINGS WARNING! Weight Hazard The appliance is heavy. Please ensure adequate care is taken when installing the appliance to prevent personal injury. The appliance must be installed onto a solid wall, stud, beam or 8.2 kg truss. Weight of the product is 8.2 kg (HP60) / 11.5 kg (HP90). (HP60) 11.5 kg (HP90)
Page 7
SAFETY AND WARNINGS IMPORTANT SAFETY INSTRUCTIONS WARNING! When using this appliance always exercise basic safety precautions including the following: Read the entire set of instructions before installing or using this appliance. ● ● Please make this information available to the person installing the appliance – ●...
Page 8
SAFETY AND WARNINGS You must read the details concerning the method and frequency of cleaning. ● ● There is a fire risk if cleaning is not carried out in accordance with the instructions. ● ● Never leave frying food unattended since grease can overheat and catch fire. ●...
INSTALLATION INSTRUCTIONS Contents of packaging BUILT-IN INTEGRATED RANGEHOOD HP60IDCHX2, HP90IDCHX2, HP60IDCHX3 & HP90IDCHX3 models INSTALLATION GUIDE / USER GUIDE NZ AU ROW Rangehood Installation instructions 150 mm ducting adapter User guide manual with non return flap 125 mm ducting 13 mm screw adapter (1)
Page 10
INSTALLATION INSTRUCTIONS Product and cabinetry cutout dimensions Ø Power cord location Ducting adapter HP60 HP90...
Page 11
INSTALLATION INSTRUCTIONS HP60 HP90 PRODUCT DIMENSIONS Overall height of product (with ducting adapter) (395) (360) Overall width of product Overall depth of product Thickness of flange Width of chassis Depth of chassis Height of side of chassis Width of top surface of chassis Length of angled surface of chassis Distance from centre of ducting outlet to back of chassis...
Page 12
INSTALLATION INSTRUCTIONS Height of rangehood MINIMUM CLEARANCES Height top of cooktop to base of product Electric cooktop min. 600 – max. 750 Gas cooktop min. 650 – max. 750 Rangehood installation height above the cooktop is the user’s preference. Lower installation heights will improve the efficiency of capturing cooking odours, grease, and smoke.
Page 13
INSTALLATION INSTRUCTIONS Venting requirements IMPORTANT! To reduce risk of fire and to properly exhaust air, be sure to duct air outside — Do not vent exhaust air into spaces within walls or ceilings or into attics, crawl spaces, or garages. The range hood can be installed to operate with the exhaust air ducted externally from the kitchen or with the exhaust air recirculating within the kitchen.
Page 14
INSTALLATION INSTRUCTIONS IMPORTANT! Venting directly into the cabinet with no ducting and louvered vent is not permitted. To recirculate your perimeter insert range hood: Determine the desired location of the 150mm louvered vent on your cabinetry. The louvered vent can be placed on the side or front of your cabinet provided there is sufficient clearance from the surrounding cabinetry to enable ventilated air to recirculate back into your kitchen.
Page 16
INSTALLATION INSTRUCTIONS Lift the rangehood and fit through the opening of the cupboard till the spring loaded brackets / clips hold the product in place. Secure rangehood while tightening the 4 brackets / clips. width depth Connect duct and plug rangehood in.
OPERATING INSTRUCTIONS Touch control panel CONTROL PANEL FEATURES Filter cleaning Activated regularly to alert of the need to clean filters. alert It can be deactivated with a single press. Timer Turn the timer on. The fan operates for 5 minutes at the current speed and each descending speed before turning off.
CLEANING AND MAINTENANCE WARNING! Unplug or disconnect the appliance from the power supply before servicing or cleaning. ● ● When replacing the bulb, let the bulb cool, and assure that power to the rangehood has ● ● been turned off. Use new bulbs according to that indicated on the rangehood nameplate. IMPORTANT! Never use abrasive or oil based cleaners.
Page 19
CLEANING AND MAINTENANCE Light bulb replacement ILCOS D code: DRR-3.5-220/240-GU10-50/50 To replace a light bulb, first disconnect the rangehood from its power supply. 2. Apply finger pressure to the face of the light bulb and twist one quarter turn anti-clockwise—the light bulb will now be free to drop out.
PARTS AND ACCESSORIES ITEM REFERENCE NUMBER LED bulb 792603 Aluminium filter 792429 Recirculation carbon filter x2 792481 Ducting 150 mm kit (eaves) PD-RHK150E Ducting 150 mm kit (wall) PD-RHK150W...
CUSTOMER CARE Before you call for service or assistance... Check the things you can do yourself. Refer to your user guide and check that: Your product is correctly installed. You are familiar with its normal operation. If after checking these points you still need assistance or parts, please refer to your nearest Fisher &...
CUSTOMER CARE *If you call, write or contact our website please provide: your name and address, model number, serial number, date of purchase and a complete description of the problem. This information is needed in order to better respond to your request for assistance. Product details can be found on the inside of the chassis.