Back; Remote Control - Insignia NS-AV511 User Manual

Back

# Description Function
1 DIGITAL IN jacks Plug the optical digital cable from a game (1) or
TV/CD (2) into the upper jacks, or the coaxial
digital cable from a BD/DVD into the lower jack.
2 HDMI jacks Plug the HDMI signal input cable from a GAME
(IN4), CBL/SAT (IN3), VCR/DVR (IN2), BD/DVD
(IN1).
Plug the HDMI output signal cable to a TV or
monitor into the OUT jack.
3 ANTENNA connectors Connect a 75 ohm FM antenna to the coaxial
connector or an AM loop antenna to the wire
connectors.
4 FRONT SPEAKERS Connect the front speakers to these jacks.
SURROUND SPEAKERS Connect the left and right surround speakers and
CENTER SPEAKER the center speaker to these connectors. If you use
the RF-RBCARD to connect your surround speakers,
do not connect them here.
5 AC power cord Plug this cord into an AC power outlet.
6 COMPONENT video jacks Plug the cables from a component video source
into the #1 (BD/DVD) or #2 (CBL/SAT) jacks.
Plug the cables to a component video monitor into
the OUT jacks.
The jacks are color coded (red, green, and blue) to
correspond to the cable connectors.
7 Composite Video and Plug the composite video and audio L/R output
Audio L/R jacks cables from the indicated devices into these jacks.
For video recording, plug the composite video and
audio L/R input cables to a VCR or DVR into the
OUT jacks
8 MONITOR OUT V (Video) Connect this jack to a TV monitor.
9 SUBWOOFER Connect the subwoofer to this jack.
4

Remote control

Item Description
1 ON/STANDBY button
2 Remote mode input selector
buttons
3
ENTER
TUNING+/–
4 SETUP button
5 LISTENING MODE buttons
www.insigniaproducts.com
Insignia NS-AV511 Surround Sound Receiver
Function
Press to turn the power on to your receiver.
Press again to go to standby mode.
Press to directly select your receiver input
source.
Press the arrow keys to navigate through the
/ / /
on-screen menus. Press ENTER to confirm a
selection or setting.
In tuning mode, press to tune to the next
(TUNING+) or previous (TUNING–) station.
Press to open the on-screen menus.
Press to select the listening mode you want.
See "Using the listening modes" on page 18
for additional information.