Insignia NS-AV511 User Manual page 17

Insignia NS-AV511 Surround Sound Receiver
3 Press or to select 11. Rocketboost, then
press ENTER. The Rocketboost menu opens.
Rocketboost
Send Wireless Audio
Listen to Wireless Audio
Connect to Wireless Network
Hub ( Manager ) Enable
4 Press or to select Hub (Manager), then
press ENTER, then press
Enable or Disable.
If you are setting up your network for the first
time, choose one of your Rocketboost senders
to be your hub. If you want the surround sound
receiver to be the hub then set the Hub
(Manager) setting in this menu to Enable.
Hub Enable
Hub Status
[< >] to Enable/Disable
If you already have a Rocketboost network
established, set the Hub (Manager) setting in
this menu to Disable.
5 Press RETURN to go to the previous menu.
Note
Every new Rocketboost device you add to your
Rocketboost network must be "joined" to your
Rocketboost hub device. If the surround sound
receiver is the Hub of your network then repeat the
following steps for each of your Rocketboost devices
on your network.
6 If possible, bring your existing Rocketboost Hub
device, or the new Rocketboost device to which
you'd like to join, into the same room as the
soundbar.
7 Press the Power button on your other
Rocketboost device to turn it on.
8 Press and hold the Power button on your other
Rocketboost device for more than three seconds
to put it into joining mode. The power indicator
starts blinking rapidly and the unit will stay in
joining mode for 30 seconds.
9 Press or to select Connect to Wireless
Network, then press ENTER.
10 The display on your surround sound receiver
shows "Connecting. " When connected to your
other Rocketboost device, the display shows
"Connected. "
or to select
< Enabled >
www.insigniaproducts.com
• When successfully joined, the power indicator
LED on your other Rocketboost device will
stop blinking and stay on.
• If joining fails after 30 seconds, the display on
your surround sound receiver shows
"Timeout. " If this occurs, repeat the above
steps.
Listening to music from other Rocketboost™ products
To listen to music:
1 Press the Power button on your surround sound
receiver to turn it on.
2 Press SETUP. The Setup Menu opens.
Setup Menu
1. HDMI Input
2. Component
3. Digital Audio
4. Sp Config
5. Sp Distance
6. Level Cal
7. Audio Adjust
8. Source Setup
9. Hardware
10. HDMI Setup
11. Rocketboost
3 Press or to select 11. Rocketboost, then
press ENTER. The Rocketboost menu opens.
Rocketboost
Send Wireless Audio
Listen to Wireless Audio
Connect to Wireless Network
Hub ( Manager ) Enable
4 Press or to select Listen to Wireless
Audio, then press ENTER. The Listen to Audio
menu opens.
Listen to Audio
RF-RBAUX ( Audio In )
[ ENTER ] to Select
5 Press or to highlight the Rocketboost
device you want to listen to, then press ENTER
to select it.
[ Selected ]
13