Using Advanced Setup; Using On-Screen Setup Menus; Setting Up Hdmi Input (Hdmi Input Menu) - Insignia NS-AV511 User Manual

Listening Mode Description
In this mode, all speakers output the same sound in mono, so the sound you hear is the same regardless of where you
Full Mono
are within the listening room.
(Full Mono)
With this mode you can enjoy a virtual surround sound even with only two or three speakers. This works by controlling
T-D (Theater-
how sounds reach the listener's left and right ears. Good results may not be possible if there is too much reverb, so we
Dimensional)
recommend that you use this mode in an environment with little or no natural reverb.
(T-D)
Speaker layout
The following shows the speakers that are activated
in each type of configuration.
Z
2.1ch

Using advanced setup

Using on-screen setup menus

On-screen setup menus appear on the connected
TV and provide a convenient way to change the
receiver's various settings. Settings are organized
into nine categories on the main menu.
You can change the settings by using the on-screen
display.
To use the on-screen setup menus:
1 Press RECEIVER, then press SETUP. The Setup
menu opens.
Setup Menu
1. HDMI Input
2. Component
3. Digital Audio
4. Sp Config
5. Sp Distance
6. Level Cal
7. Audio Adjust
8. Source Setup
9. Hardware
10. HDMI Setup
11. Rocketboost
Tip
If the main menu doesn't appear, make sure the
appropriate external input is selected on your TV.
2 Press or to select a menu, then press
ENTER.
3 Press or to select an option, then press
or to change the setting.
4 Press SETUP to close the menu.
20
X C
3.1ch 5.1ch

Setting up HDMI input (HDMI Input menu)

www.insigniaproducts.com
Insignia NS-AV511 Surround Sound Receiver
Input Source Speaker Layout
MONO
STEREO
5.1ch
7.1ch
MONO
STEREO
5.1ch
7.1ch
b
a
5 Press RETURN to return to the main menu.
Tip
You can also performed these changes on the
receiver by pressing SETUP, the arrow buttons, then
ENTER.
If you connect a video component to HDMI inputs,
you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD
player to HDMI IN 2, you must assign HDMI2 to the
BD/DVD input selector.
Here are the default assignments:
Input selector Default assignment
BD/DVD HDMI1
VCR/DVR HEMI 2
CBL/SAT HDMI3
GAME HDMI4
AUX ------
TUNER ------
TV/CD ------
HDMI1, HDMI2, HDMI3, HDMI4–Select the HDMI
input to which the video component has been
connected.
- - - - -–Select if you're not using the HDMI OUT.
3.1, 5.1
2.1, 3.1, 5.1
c
d
a - Front speakers
b - Center speaker
c - Subwoofer
d - Surround speakers