Setting Up Hdmi (Hdmi Setup Menu) - Insignia NS-AV511 User Manual

The Center Width setting lets you adjust the width
of the sound from the center speaker when using
the Dolby Pro Logic II Music listening mode.
Normally, if you're using a center speaker, the center
channel sound is output by only the center speaker.
(If you're not using a center speaker, the center
channel sound is distributed to the front left and
right speakers to create a phantom center). This
setting controls the front left, right, and center mix,
allowing you to adjust the weight of the center
channel sound.
Submenu Configuration
On– Turns the Panorama function on.
Panorama
Off–Turns the Panorama function off.
–3 to 0 to +3
Dimension
0 to 3 to 7
Center Width
Setting the DTS options (Center Image submenu)
The DTS Neo:6 Music listening mode lets you create
6-channel surround sound from 2-channel stereo
sources. With this setting, you can specify by how
much the front left and right channel output is
attenuated in order to create the center channel.
A value 0 is only audible from the center speaker. A
value of more than 0 is audible from the left and
right speakers as well.
Submenu Configuration
0 to 2 (default) to 5
Center Image
Adjusting the Theater-Dimensional setting (Listening
Angle submenu)
This setting lets you optimize the
Theater-Dimensional listening mode by specifying
the angle of the front left and right speakers relative
to the listening position. Ideally, the front left and
right speakers should be equidistant from the
listening position and at an angle close to one of
the two available settings.
Submenu Options
Wide (default)–The listening angle is 40 degrees.
Listening Angle
Narrow–The listening angle is 20 degrees.
22
20°/40°
www.insigniaproducts.com
Insignia NS-AV511 Surround Sound Receiver

Setting up HDMI (HDMI Setup menu)

Submenu Configuration
Off (default)–CEC disabled.
CEC Function
On–CEC enabled.
Off (default)–HDMI Through is off.
Auto–Detects the signal and automatically selects
the input source.
BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/CD–
HDMI Through
Selects the input source for which the HDMI Through
function is enabled.
Last–The HDMI Through function is activated on the
input source selected when the AV receiver is set to
Standby mode.
Off (default)–HDMI audio is not output.
Audio TV OUT
On–HDMI audio is output.
Off–Select if you don't want to use audio return
channel (ARC) function.
Audio Return Ch (ARC)
Auto (default)–The audio signal from your TV tuner
can be sent digitally to the HDMI OUT of the receiver.
On (default)–Lip sync enabled.
LipSync
Off–Lip sync disabled.
CEC Function (HDMI Control submenu)
This function lets CEC-compatible components
connected via HDMI to be controlled by the
receiver.
Notes
• When set to On, the name of connected
CEC-compatible components and CEC On are
displayed on the receiver when the menu is
closed.
• When set to Off, CEC Off is displayed on the
receiver when the menu is closed.
• When a CEC-compatible component is
connected to the receiver via HDMI cable, the
name of the connected component is displayed
on the receiver. For example, when you are
watching TV, if you turn on a Blu-ray Disc/DVD
player by the receiver's remote control, the
name of the Blu-ray Disc/DVD player is
displayed on the receiver.
• Set to Off when a connected piece of
equipment is not compatible or it is unclear
whether the equipment is compatible or not.
• If movement is unnatural when set to On,
change the setting to Off.
• Refer to the connected component's instruction
manual for details.
HDMI Through
• Off (default)–HDMI Through is off.
• Auto–Detects the signal and automatically
selects the input source.
• BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,
TV/CD– Selects the input source for which the
HDMI Through function is enabled.
• Last–The HDMI Through function is activated on
the input source selected when the AV receiver is
set to Standby mode.