Uninstalling Base - Chicco KeyFit Base User Manual

INSTALLATION USING UAS

Uninstalling Base

Remove Carrier from Base
Loosen UAS by lifting the UAS
1
Release Lever and pulling Base away
from vehicle seat back.
Detach UAS Connectors by pressing
2
the red button on each UAS Connector,
and remove Base from vehicle.
Storing UAS
Insert UAS Connectors into storage
pockets.
a
Pull UAS Pull Strap to secure UAS
1
Connectors.
Roll UAS Pull Strap and store in
2
Pull Strap Storage Pocket.
NEVER travel with infant restraint system unsecured in vehicle.
Passengers may be injured during a sudden stop or crash.
When not using UAS, the UAS Connectors and Pull Strap MUST be stored
properly.
1
2
1
a
2
22
a