VEHICLE INFORMATION
This infant restraint system can only be used in the
following types of vehicles: Multi Purpose Passenger
Vehicle, Passenger Car and Trucks.
This infant restraint system can be securely installed in
most vehicles using the vehicle seat belts or UAS. BUT,
there are some vehicle belts and installation positions
that are UNSAFE for use with this infant restraint system.
Refer to your Vehicle Owner's Manual for
detailed information about vehicle belts,
UAS, and preferred infant restraint system
installation positions.
UNSAFE Vehicle Belts
The following types of vehicle belts MUST NOT
be used to install this Infant restraint system:
Motorized (automatic) vehicle belts.
1
Door mounted vehicle belts.
2
Lap/Shoulder Belts with 2 retractors,
3
(unless Lap Belt has a "Lock Mode").
1 retractor tensions the Lap Belt and
1 tensions the Shoulder Belt.
Non-Locking (ELR) Lap Belts.
4
(Emergency Locking Retractors)
These belts remain loose after installation
and only lock during a sudden stop or crash.
16
1
2
3
4
Need help?
Do you have a question about the KeyFit Base and is the answer not in the manual?
Questions and answers