Chicco KeyFit Base User Manual page 21

INSTALLATION USING UAS
Tighten UAS Belts by pulling up firmly
5
on UAS Pull Strap while pressing Base
firmly into vehicle seat.
Store UAS Pull Strap neatly in Pull
6
Strap Storage Pocket.
Check Installation
7
UAS belts MUST be TIGHT
a
Base MUST be STABLE
b
Bubble MUST be between arrows
c
UAS Pull Strap MUST NOT
d
interfere with attachment of Carrier
to Base.
Attach Carrier to Base after properly
8
securing infant in Carrier.
ALWAYS lift up on Carrier to
verify it is properly attached to the
Base.
ALWAYS place handle in
LOCKED "CARRY" position when
using Infant restraint system in
vehicle.
5
6
7
8
21