1. Manuals
  2. Brands
  3. Metra Electronics Manuals
  4. Automobile Accessories
  5. 99-8151
  6. Installation instructions manual

Metra Electronics 99-8151 Installation Instructions Manual

For lexus is 300 2001-2005
Hide thumbs Also See for 99-8151:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Download this manual
Lexus IS 300 2001-2005
KIT FEATURES
• DIN radio provision with pocket
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
KIT COMPONENTS
• A) Radio housing • B) Pocket trim plate • C) ISO DDIN trim plate • D) ISO DIN trim plate • E) Pocket
• F) Rear support bracket • G) Mounting brackets • H) Spacer brackets • I) ISO snap-in brackets
• J) (6) #8X3/8" Phillips truss head screws • K) (2) #8 x 3/8" Phillips pan head screws
A
B
H
G
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • TYTO-01
Antenna Adapter: • Not required
METRA. The World's best kits.
Installation instructions for part 99-8151
99-8151
C
D
I
™
E
F
J
K
metraonline.com

Table of Contents

Dash Disassembly ..................................................2
- ISO DDIN radio provision ...................................... 4
- DIN radio provision with pocket ............................ 5
- ISO DIN radio provision with pocket ...................... 6
-
ISO DDIN radio provision ...................................... 7
TOOLS REQUIRED
• Phillips screwdriver • Panel removal tool • Cutting tool
• 10mm socket wrench
CAUTION!
Metra recommends disconnecting the negative bat -
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con -
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 99-8151 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Metra Electronics 99-8151

Summary of Contents for Metra Electronics 99-8151

  • Page 1: Table Of Contents

    Installation instructions for part 99-8151 Lexus IS 300 2001-2005 Table of Contents 99-8151 Dash Disassembly ..........2 Kit Preparation – DIN & ISO DIN radio provision with pocket .... 3 KIT FEATURES • DIN radio provision with pocket – ISO DDIN radio provision ........4 •...

  • Page 2: Dash Disassembly

    99-8151 Dash Disassembly 1. Using a panel removal tool, unsnap and remove the liner from the tray above the center vents. (Figure A) 2. Remove (2) Phillips screws from inside the tray. (Figure B) 3. Using a panel removal tool, unsnap and remove the center trim panel including the vents and tray.

  • Page 3: Kit Preparation

    99-8151 Kit Preparation DIN & ISO DIN radio provision 3. Secure the radio brackets to the with pocket radio-housing/pocket assembly using the supplied (2) #8 x 3/8” 1. Remove the ISO DDIN trim plate Phillips truss head screws at the from the radio housing, and then top, and (2) #8 x 3/8”...

  • Page 4: Iso Ddin Radio Provision

    99-8151 Kit Preparation ISO DDIN radio provision 1. Secure the radio brackets to the radio housing using the supplied (2) #8 x 3/8” Phillips truss head screws at the top, and (2) #8 x 3/8” Phillips pan head screws at the bottom.

  • Page 5: Kit Assembly

    99-8151 Kit Assembly DIN radio provision with pocket 1. Remove the metal DIN sleeve from the aftermarket radio. 2. Slide the sleeve into the radio housing assembly and secure by bending the metal locking tabs down. (Figure A) 3. Slide the radio back into the sleeve until it clicks in.

  • Page 6: Iso Din Radio Provision With Pocket

    99-8151 Kit Assembly ISO DIN radio provision with pocket 1. Remove the metal DIN sleeve and trim ring from the aftermarket radio. 2. Secure the ISO snap-in brackets to the radio using the screws supplied with the radio. (Figure A) 3.

  • Page 7: Iso Ddin Radio Provision

    99-8151 Kit Assembly ISO DDIN radio provision 1. Attach the spacer brackets to the mounting brackets. (Figure A) 2. Slide the radio between the spacer/bracket assembly and align it with the with the holes in the radio. Secure it to the assembly using the screws supplied with the radio.
  • Page 8 Installation instructions for part 99-8151 IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated.
  • Page 9 Instrucciones de instalación para la pieza 99-8151 Lexus IS 300 2001-2005 Indice 99-8151 Desmontaje del tablero ..........2 Preparación del kit ..........3-4 CARACTERÍSTICAS DEL KIT – Provisión de radio DIN y ISO DIN con cavidad ..3 • Provisión de radio DIN con cavidad •...

  • Page 10: Desmontaje Del Tablero

    99-8151 Desmontaje del tablero 1. Utilizando una herramienta de remoción de paneles, suelte a presión y retire el revestimiento de la charola arriba de las rejillas centrales. (Figura A) 2. Quite (2) tornillos Phillips localizados en el interior de la charola. (Figura B) 3.

  • Page 11: Preparación Del Kit

    99-8151 Preparación del kit Provisión de radio DIN y ISO DIN 3. Atornille los soportes del radio al con cavidad ensamble de la carcasa del radio/ cavidad con los (2) tornillos Phillips 1. Quite la placa de la moldura ISO de cabeza segmentada #8 x 3/8”...

  • Page 12: Provisión De Radio Iso Ddin

    99-8151 Preparación del kit Provisión de radio ISO DDIN 1. Atornille los soportes del radio a la carcasa del radio con los (2) tornillos Phillips de cabeza segmentada #8 x 3/8” suministrados en la parte superior y (2) tornillos Phillips de cabeza troncocónica #8 x 3/8”...

  • Page 13: Ensamble Del Kit

    99-8151 Ensamble del kit Provisión de radio DIN con cavidad 1. Quite la manga de metal DIN del radio de mercado secundario. 2. Deslice la manga al la carcasa del radio ensamble y sujétela doblando hacia abajo las pestañas de metal.

  • Page 14: Provisión De Radio Iso Din Con Cavidad

    99-8151 Ensamble del kit Provisión de radio ISO DIN con cavidad 1. Quite la manga de metal DIN y el anillo de moldura del radio de mercado secundario. 2. Atornille los soportes a presión ISO al radio usando los tornillos suministrados con el radio.

  • Page 15: Provisión De Radio Iso Ddin

    99-8151 Ensamble del kit Provisión de radio ISO DDIN 1. Sujete los soportes espaciadores a los soportes de montaje. (Figura A) 2. Deslice el radio entre el ensamble espaciador/soporte y alinee con los orificios del radio. Sujete al ensamble con los tornillos que vienen con el radio.
  • Page 16 Instrucciones de instalación para la pieza 99-8151 IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente...

Table of Contents