Yamaha Commercial Audio
Press the [LONG FADERS] button in the bottom-left corner again to return to
the Mixer Overview.
4.5
Channel ON
Press [ON] to change the on/off status of the channel. The button is green
when the channel is on. When a channel is off, its name and level meter will
dim and its fader position shown in the "Navigation/Meter Bridge" will also dim.
If a channel is muted as part of a Mute Group, the ON button will blink.
4.6
CUE
The [CUE] buttons for each channel control the mixer's Cue functions. Their
operation mode corresponds to the status of the [LAST CUE] button on the left
side of the Mixer Overview.
When the [LAST CUE] button is highlighted yellow, only one channel can be
cued at a time. When this button is grey, multiple channels can be cued
simultaneously. This is equivalent to Mix Cue mode in the CL series console.
The [CUE CLEAR] button will cancel any cues that have been activated. This
is useful when there are multiple cues to cancel, and when some are hidden in
other layers.
CL StageMix V3.0 User Guide
Page 11