Decrement / Increment Scene; Scene List; Scene Range - Yamaha CL3 User Manual

Yamaha Commercial Audio
7.2

DECREMENT / INCREMENT SCENE

Buttons in the upper right part of the Scene window allow instant recall
of the Previous and Next Scene relative to the current Scene. For
example, if the Current Scene is 005, pressing the [INC SCENE] button
will recall Scene 006 in the console. However, if Scene 006 is empty,
the next highest Scene containing data will be recalled.
Note: the [DEC SCENE] and [INC SCENE] buttons will only appear in
the Scene window if the related preference has been enabled in the
Setup window (refer to 8.7).
7.3

SCENE LIST

When the Scene Memory window is accessed for the first time after
launching StageMix, the Scene List will be sent from the console to
StageMix.
Note: if StageMix loses its Wi-Fi connection to the console, the Scene
List will need to be sent from the console again after the connection is
re-established.
12 Scenes can be viewed simultaneously in the Scene List. Drag up
and down in the list to access other Scenes.
The Current Scene will be indicated by a check mark to the right of the
Scene Title (the current scene is also displayed in the upper left portion
of the Scene screen).
displayed with a grey background. Scene titles that have not been sent
from the console to StageMix will be indicated by a question mark.
7.4

SCENE RANGE

If the console contains a large number of Scenes, it may take some
time for the complete Scene List to be transmitted to StageMix. To
minimize the time required to update the Scene List in StageMix, a
Scene Range can be set so that only necessary Scenes are sent from
the console to StageMix.
By default, the Scene Range is set to the full range from Scene 0 to
300. By pressing the [SCENE RANGE] button, the user can define the
range of Scenes that will be updated in the Scene List. This range will
be remembered by StageMix and will continue to be used until it is
changed.
To update the Scene Range, tap the [SCENE RANGE] button on the
right side of the Scene Memory window. A small popup will appear.
Press the [FIRST] or [LAST] button to access the iPad's onscreen
keyboard.
Range and press Return. Then press the [UPDATE RANGE] button in
this popup to update the Scene List based on the currently active range.
Empty Scene Memories locations will be
Enter a number for the First and/or Last Scenes in the
CL StageMix V3.0 User Guide
Page 30