Air Flow Direction Adjustment - Haier HSU-09HEA03/R2 - annexe 2 Operating Manual

Operation

Air Flow Direction Adjustment

1.Status display of air sending
Horizontal flap
( Cool/Dry standard position)
Pos.1
( Upward swing )
Pos.2
( Downward swing )
Pos.3
( Auto swing )
Pos.4
2.Up and down air flow direction(Use remote controller)
For each press of SWING button, air flow direction on remote
controller display as follows according to different operation modes:
Pos.1 Pos.2
The horizontal flap will swing according to the above positions
3.Left and right air flow adjustment(manual)
Move the vertical blade by a knob on air
conditioner to adjust left and right direction
referring to Fig.
Cautions:
Do not try to adjust the flap by hand.
When adjusting the flap by hand,turn off the unit ,and use the remote controller to restart the unit.
When humidity is high,condensate water might occur at air outlet if all vertical louvers are
adjusted to left or right.
It is advisable not to keep horizontal flap at downward position for a long time in COOLor DRY
m o d e o , h t r e w s i , e c o
Hints
As cold air flows downward in COOL mode, adjusting air flow horizontally will be much more
helpful for a better air circulation.
As warm air flows upward in HEAT mode, adjusting air flow oblique downwards will be much more
helpful for a better air circulation.
Remote controller
Blank
Pos.3
n d e n s a e t w t a r e m g i t h . o
Pos.4
c c u . r
14
ON/OFF TEMP
MODE
SET
FAN
TIMER
SWING CLOCK
HEALTH
SLEEP
LOCK
RESET