Table of Contents
Advertisement
The intent of this manual is to provide a guide for the installation of the
Standalone DC Fast Charger. The owner/operator of the charger is responsible
for contracting an installer, and must make sure that all national/local codes,
laws, and regulations are complied with during the installation.
Compliance with the information in this manual does NOT relieve the owner/
operator of their responsibility tocomply with all applicable codes and safety
standards.
To provide feedback on the contents of this manual or request additional
information please contact your supplier.
• NFPA-70 - Article 625 - Electrical Vehicle Power Transfer System
• NFPA-70E - Article 110 - General Requirements for Electrical Safety - Related
Work Practices
• NFPA-70E - Article 120 - Establish an Electrically Safe Work Condition
• NFPA-70E - Article 130 - Work Involving Electrical Hazards
• Electric Vehicle (EV) Charging System Equipment [UL 2202:2009
Ed.2+R:09Feb2018]
• Power Conversion Equipment [CSA C22.2#107.1:2016 Ed.4]
• FCC CFR Title 47 Part 15 Subpart B: 2018 Class A
• ICES-003: 2020 Issue 7
• Energy Star
• California Type Evaluation Program / National Type Evaluation Program (NIST
Handbook 44)
• ISO 15118 -2
• OCPP 1.6 JSON / OCPP 2.0 JSON
Introduction
Standards and References
DC EVSE Standalone DC Fast Charger 1
Advertisement
Table of Contents
Need help?
Do you have a question about the DC Series and is the answer not in the manual?