Sleep Operation - Haier H2SM- - annexe 1 Operation Manual

Operation

Sleep Operation

Before going to bed,you can simply press the SLEEP
button and unit will operate in SLEEP mode and bring
you a sound sleep.
Use of SLEEP function
After the unit starts,set the operation status,
then press SLEEP button before which the
clock must be adjusted and time being set.
Operation Mode
1. In COOL,DRY mode
1 hours after SLEEP mode starts,temp.will become
1 higher than temp.setting.After another 1 hours,
C
O
temp.rises by 1 C futher.The unit will run for further
O
6 hours then stops Temp. is higher than temp.
setting so that room temperature won't be too low
for your sleep.
SLEEP operation starts
1 hr
Rises 1
1 hr
Temp.setting
In COOL, DRY mode
In HEAT mode
2.
1 hours after SLEEP mode starts,temp will
become 2 lower than temp.setting.After
C
O
another 1 hours,temp decrease by 2
futher.After more another 3 hours,temp.rises
by 1 futher.The unit will run for further 3
C
O
hours then stops.Temp.is lower than temp.
setting so that room temperature won't be
too high for your sleep.
4
SLEEP operation stops
Approx.6hrs
Rises 1 O C
C
O
Unit stop
C
O
Temp.setting
1 hr
Decreases 2
1 hr
Decreases 2
3 hrs
SLEEP
operation starts
In HEAT mode
In AUTO mode
3.
The unit operaters in corresponding sleep mode
adapted to the automatically selected operation
mode.
4. In FAN mode
It has no SLEEP function.
5.Set the wind speed change when sleeping
If the wind speed is high or middle before
setting for the sleep, set for lowing the wind
speed after sleeping.
If it is low wind, no change.
Note
When TIMER function is set, the sleeping function
can't be set up .After the sleeping function is set up
if user resets TIMER function, the sleeping function
will be cancelled;the machine will be in the state of
timing-on.
Unit stop
C
O
C
O
3 hrs
Rises 1 C
O
SLEEP
operation stops
,