GE Monogram ZBD5900F01SS Use And Care Manual page 17

Ca and Cleaning
1) ishwasher
Removing
and Cleaning
the Spray
Arms and
Glasvs Tr@
Periodically remoxe and tlean d_e spray arms
m make sure dmt none of tlle nozzles haxe
be(ome blocked.
To remove the lower spray arm, grasp d_e
cemer of d_e spray arm and pull upwards, it will
un( lip. When replacing, make sure dm spray
arm is tnlly seated.
Tile plasti( cone on tile underside of tl_e spray
arm (an be deta( bed by uns(rewing it
couulerclockwise.
To remove the upper spray arm, carefldly
unscrew d_e spray arm flom the plastic tower.
To achieve this, hold the inner tower steady
and unscrew tl_e spray arm clockwise. To
replace d_e spray arm, carefldly screw tlle spray
arm coumerclockwise omo [lie inner lower.
To clean the upper and lower spray arms, rinse
diem under running water and make sure spray
nozzles are (lear.
The glass trap is located in tlle stainless steel
fiber at tl_e base of your dishwasher. The glass
trap is used to collect larger tbod items and
other foreign objects, which may be too big to
pass through the drain pump. For best wash
pertbrman( e, (heck die glass U:ap o( ( asionally.
To remove the glass trap, m_ist coumerclockwlse,
rotate tl_e glass uap and liii. To clean the glass
trap, empU and rinse dloroughly. To replace,
reverse dmse steps ma_ng sure dm glass trap
locks imo place.
Pull up to remove
remove cone
Rotate counterclockwise
and lift to remove glass trap
16