Maintenance; Battery - Fora Test N'GO Advance Pro Owner's Manual

MAINTENANCE

Battery

Your meter comes with one 1.5V AAA size alkaline battery.
Low Battery Signal
Replacing the Battery
To replace the battery, make sure that the meter is turned off.
1. Press the edge of the battery cover and lift it up to remove.
2. Remove the old battery and replace it with one 1.5V AAA size
alkaline battery.
3. Close the battery cover. If the battery is inserted correctly, you will
hear a "beep" afterwards.
NOTE:
 Replacing the batteries does not affect the test results stored in the memory.
 As with all small batteries, these batteries should be kept away from children.
 Batteries might leak chemicals if unused for a long time. Remove the batteries
if you are not going to use the device for an extended period (i.e., 3 months or
more).
 Properly dispose of the batteries according to your local environmental
regulations.
The meter will display the message below to alert you
when the meter power is getting low.
The " " appears with E-b and low:
The power is not enough to do a test. Please change the
battery immediately.
25