Fora Test N'GO Advance Pro Owner's Manual page 38

Stop using the meter if you see any signs of deterioration. For example:
● Meter cannot be turned on
● LCD display cracks or becomes cloudy
● Buttons no longer function
● Meter outer casing cracks
● Data cannot be transmitted
● Color or paint/printing on housing is abnormal
● Scratches or abrasions on meter are higher than acceptable
Please contact customer service for a replacement meter if any of the
signs of deterioration are noticed.
NOTE:
 Do NOT clean and disinfect the meter while performing tests.
 Do NOT allow cleaning and disinfecting solution to get in the test slot.
 If you do get moisture in the test strip slot, wipe it away with a corner of tissue.
 Always dry the meter thoroughly before using it.
 Do not spray the meter directly with cleaning solutions especially those
containing water (i.e. soapy water), as this could cause the solution to enter the
case inside and damage the electronic components or circuitry.
Meter Storage
 Storage conditions: -4°F to 140°F (-20°C to 60°C), below 95%
relative humidity.
 Always store or transport the meter in its original storage case.
 Avoid dropping and heavy impact.
 Avoid direct sunlight and high humidity.
28