Table of Contents
Advertisement
MAINTENANCE
Battery
Your meter comes with one 3V CR2032 lithium
battery.
Low Battery Signal
The meter will display one of the messages below
to alert you when the meter's power is getting low.
1. The
symbol appears along with a display
message: The meter is functional and the results
remain accurate, but it is time to change the
battery.
2. The meter displays E-b:
There is not enough power for a test.
Please change the battery
immediately.
Replacing the Battery
To replace the battery, make sure that the
meter is turned off.
1. Press the edge of the battery clip and lift it up
to remove.
SET
CR2032
BATTERY
2. Remove the old battery and replace with a new
3V CR2032 lithium battery.
3. Close the battery cover. If the battery is
inserted correctly, you will hear a "beep"
confi rming the battery has been properly
inserted.
Replacing the battery does not affect the test
results stored in the memory.
Battery might leak chemicals if unused for a long
period of time. Remove the battery if you are not
planning to use the device for an extended period
(i.e., 3 months or more).
Properly dispose of the battery according to your
local environmental regulations.
SET
CR2032
BATTERY
SET
CR2032
BATTERY
NOTE
15
Advertisement
Table of Contents
