Firmware Upgrade - D-Link AirSpot DSA-3200 User Manual

DSA-3200 Wireless Service Gateway User Manual

4.3.10 Firmware Upgrade

One may upgrade the DSA-3200 firmware with any later version code obtained
from D-Link Systems, Inc. Support Site.
DSA-3200 Support Page
Warning: Firmware upgrade may cause user data loss. Please refer to the version
description or release notes to see if there is any limitation before upgrading your
firmware.
Click "Browse" to browse the local HDD for the appropriate firmware file. Upon
locating the appropriate firmware image file, click "Submit" and the browser will
upload the firmware file to the DSA-3200. Once the upload procedure has begun do
not disconnect power or attempt to access the DSA-3200 through another interface.
Doing so might interrupt the upgrade process rendering the flash image useless.
You must restart the system before the upgrade firmware is effective. If you have
modified any device settings, remember to save the setting before restarting the
system.
Warning: Please restart the system through the management interface. Do not
turn off the system directly and then turn on the power again. Doing so may damage
the upgraded firmware.
71