Twist Activation - RBR duo3 C.T uv Manual

6.3 Twist activation

3
All RBR Generation standard instruments are equipped with twist activation as a standard
Guide: Standard Instruments
Sampling
Twist activation allows you to start or pause the instrument without the need to connect to a computer.
When you select "Twist activation" in Ruskin, the instrument starts to sample based on the twist PAUSE/RUN position
rather than a schedule. To start sampling, first click "Enable" in Ruskin to enable logging. The status will then become
"Paused". Turn the battery end-cap to the RUN position. The instrument will vibrate with one long pulse and start
sampling. To pause it, turn the battery end-cap to the PAUSE position. The instrument will vibrate with three short
pulses to indicate it has paused logging.
.
Wi-Fi
Twist activation allows you to connect to the instrument over the Wi-Fi when using a mobile device.
See Wi-Fi module for details.
RBR#0015699revB
3
.
Twist activation mode
Left: PAUSE, right: RUN
.
.
feature. See Ruskin User
19