ELECTRONIC PARKING BRAKE
Assisted operation
Applying the electronic parking
brake
With the vehicle stationary, the
electronic parking brake can be used
to immobilise the vehicle :
– by pressing the engine start/stop
button 1 ;
or
– when the driver's seat belt is
unfastened ;
or
– when the driver's door is opened ;
or
– for vehicles fitted with an automatic
gearbox, when position P is
engaged.
The electronic parking
brake can be used to
immobilise the vehicle.
Before leaving the
vehicle, check that the electronic
parking brake is fully applied.
Warning light 3 on switch 4 and
warning light
on the
instrument panel light up to show
that the parking brake is applied
but go out when the doors are
locked. Depending on the vehicle,
a sticker is located on the upper
section of the windscreen to
remind you of this.
In all other instances, for example the
engine has stalled or is in standby
due to the Stop and Start 128, the
assisted parking brake is not applied
automatically. Manual mode must be
used. For certain country-specific
model versions, the assisted brake
application function is not activated.
Refer to the information on "Manual
operation".
To confirm that the electronic parking
brake is applied, the message "Parking
Brake ON" is displayed, the
D r i v i n g - 1 3 3
3
Need help?
Do you have a question about the ARKANA MEGANE CONQUEST 2024 and is the answer not in the manual?