Table of Contents
Advertisement
6. Control Panel Instructions
6.2 Setting the Laser Power
Select Max-Power or Min-Power on the main interface, and the following displays will appear.
When
is pushed, the green block can move up and down to denote the changing item. Then
or
and
or
can be used to change the value. Press
to save the change.
Press
to invalidate the change and return to the main interface.
6.3 Setting the Laser Speed
Select SPEED on the main interface, and the following dialogue box will appear:
A cursor will appear when pushing
or
. Move the cursor to the numeral area and push
or
to change the value. Press
to save the change. Press
to invalidate the change
and return to the main interface.
53
Advertisement
Table of Contents
Need help?
Do you have a question about the PRONTO 40 and is the answer not in the manual?