Connecting External Equipment; Connecting A Video Recorder - Beko 15LB450 Operating Instructions Manual

Connecting external
equipment
You can connect a wide range of audio and
video equipment to your TV.
Connecting a video
recorder
Via SCART
Make sure the TV and video recorder are
18
both switched off.
Plug one end of the SCART lead (not
supplied) into the back of the video recorder
and the other end into the SCART
socket on the back of the TV.
Switch on the video recorder and the TV.
Press the AV button on the remote
AV
control to select AV1.
Please note:
You can connect RGB external equipmen
via Scart. Full specification Scart cable is
required for this purpose.
Select the video outputs of the external device
by refering to it's operation instructions.
Via PHONO lead (optional)
Make sure the TV and video recorder are
both switched off.
Plug one end of the PHONO lead into the
video and audio out sockets on the back of the
video recorder and plug the other end into
the video and audio in sockets of the TV.
If the sound is in mono use the Audio Input
L. In the SOUND menu select MONO.