Beko 15LB450 Operating Instructions Manual page 20

Please note
If you do not press any buttons for 15 seconds
the TV will exit the menu system.
Use the Program down button to
select AUTOPROGRAM and
press
the OK button. A list of
OK
countries will appear. Select
the desired country (UK) using
Program and Volume buttons.
Ensure the aerial is connected
OK
properly press the OK button.
Autoprogam will start.
To cancel Autoprogram whilst it
isworking press the Menu button
repetitively.
As Autoprogram stores a channel
it will appear briefly on the screen
before the search continues.
Your TV is now tuned and ready to use.
Please note:
If auto sort fails to arrange the programmes
in the required sequence please refer to
programme organising.(PAGE 11)
Manual tuning
If you want to tune manually:
In the Setup menu select
PROGRAM NO using
the Program down button
and use the Volume up
button to change the Program No
to 01.
Starting with Program 01, tune
in the first channel as follows:
Use the Program down button
to select SEARCH.
Press the Volume up or Volume
down button to start the tuning
search.
When the search finds a strong
channel signal it will stop
searching. The picture will appear.
SETUP
CHANNEL
I
SYSTEM
SEARCH
FINE TUNE
PROGRAM NUMBER
AUTO PROGRAM
STORE
Use the Program down button to
select PROGRAM NO.
Use the Volume up/down or numeric
buttons to select the desired
programme number.
Use the Program down button to
select STORE. Press theOKbutton
and STORED will appear on the
OK
STORE line.
You have now stored the first
channel.
Use the Program up button to
select SEARCH again and
continue the tuning procedure
until you have tuned in all the
programmes you want or the
television can receive.
9