Basic Operation - Aiwa CX-NV20 Operating Instructions Manual

1
p-)
b
2 F==q
b
3 @
—
—
b
BASIC OPERATION
1
2
3
4
5
Press the CD button.
Press the A OPEN/CLOSE button to open the disc
compartment.
Tray numbers 1 and 2 flash in the display.
Load disc(s) with the label side up.
@ Playing one or two discs
Place discs on trays 1 and 2.
@ Playing three discs
After placing two discs, press the DISC CHANGE button to
rotate the trays. Place the next disc on tray 3.
mm
To load an 8cm (3 in.) disc, put it onto the inner circle of the tray.
Press the A OPEN/CLOSE button to close the disc
compartment.
@
Selected disc number
@ Total playing time of the selected disc
@ Total number of tracks on the selected disc
@ Music calendar
This shows the track numbers on the selected disc.
When a disc contains 21 tracks or more, only 20 tracks are
displayed.
Press the D button to starl play.
Play begins with the disc on tray 1. All the discs are played only
once.
@ Number of track being played
@ Playing time of track
@ Number of track being played flashes.
During playback
A tray which has no disc is skipped and play proceeds to the next
tray. The indicator of the skipped tray number goes out in the
display.
To stop play
Press the button.
To stop and open the tray at the same time, press the A OPEN/
CLOSE button.
To
pause
Press the II button.
To resume play, press it again.
To check the remaining time
Press the DISPLAY button on the remote control while pressing the
SHIFT button during playback. The amount of time remaining until
all tracks finish playing is displayed.
To restore the play time display, press the DISPLAY button while
pressing the SHIFT button again.
18