Table of Contents
Advertisement
I
J
J
b
BASIC RECORDING
RECORDING
FROM
A CD, RADIO
OR
CONNECTED EQUIPMENT
Preparation
Wind up the tape to the point recording starts.
Note that recording is done on only one side of the tape.
Use only normal (type I) tapes.
1
2
3
Insert the tape to be recorded on into deck 1 and
push the cassette holder to close it.
Press the H / A button to open the cassette holder.
Insert the tape with the side to be recorded on facing you and the
exposed side down.
Get ready for the source to be recorded.
To
recordfrom a
CD
Press the CD button and load a disc,
To record from a radio broadcast
Press the TUNEFUBAND button and tune in to a station.
To record from the connected source
Press the VIDEO/AUX button and play it.
Press the
button to start recording.
The D button is depressed simultaneously.
When recording from a CD, playing and recording start
simultaneously from the first track.
To stop recording
Press the
/ A button,
To pause recording
Press the II button.
To resume recording, press it again.
To record selected tracks of the CD
Before pressing the @ button, program the tracks (see page 26).
To record part of the CD
When the
button is pressed, recording always starts from the first
track. To start in the middle of a track, play the CD first and press
the II button for CD at the point you wish to start recording from.
Then, press the
button. The pause mode for CD button is
released automatically and recording starts.
To
erase a recording
A previous recording is erased when a new recording is madecm
that part of that tape.
1 Insert the tape you want to erase into deck 1.
2 Press the TAPE button.
3 Windup the tape to the point where the erasure is to be started.
4 Press the
button on deck 1 to start erasure.
Hide quick links:
Advertisement
Table of Contents
