Connections; Basic Connections - Aiwa CX-NV20 Operating Instructions Manual

1
@
lrFM
75 Q
CONNECTIONS
BASIC CONNECTIONS
Connect the equipment and accessories following steps 1 to 3.
After connecting the following items, as shown in illustration ,
the unit is ready for operation.
Refer also to page 34 on connecting optional equipment, for
example, a television or turntable.
1
2
Connect the speakers with the unit.
Connect the right speaker to the R'terminal, and the left to the
L terminal.
Open the lever of the speaker terminals and insert the conductor
of the speaker cords with the stripe to @ and that of the other
cords to ~.
Then, shut the lever to lock.
If
connecting speakers other than the supplied ones
Use speakers with an impedance of 6 ohms.
m
This speaker system is magnetically shielded. However, if
the speaker should affect the color on your TV screen, turn off
the TV and turn it on again 15 – 30 minutes later. If the TV
screen still has poor color, place the speaker system away
from the TV.
Do not leave magnets or objects generating magnetism near
the speaker system.
Connect the supplied antennas. + See illustration
2-m .
Push the lever of each terminal, and insert the conductor. Then,
release the lever to lock.
FM: Connect the conductor of the FM feeder antenna @to the
FM 75 Q terminals.
AM: Connect the conductor of the AM loop antenna (@tothe AM
LOOP terminals.
To be continued.
Q u