Connection; Listening To Other Sources - Aiwa CX-NV20 Operating Instructions Manual

000
000000000000
000000000000000000
0000000000000000
@
o~(}f} ::@
~oooo%o
L
CONNECTION
Analog signals can be input to this unit.
When an LD player without digital out terminals, VCR for playback,
turntable, etc, is connected to this unit, the incoming sound from it
can be played or recorded on this unit.
Before operation, connect the external equipment using the optional
connection cord with phono plug.
Connect the red plug to the R jack, and the white plug
to the L jack of the VIDEO/AUX jack. + See illustration
.
Connecting a turntable
Use an Aiwa turntable equipped with an equalizer amplifier
LISTENING TO OTHER SOURCES
After connecting, carry out the following steps to listen to the
source. + See illustration H
1 Press the VIDEO/AUX button.
"VIDEO is displayed,
2 Play the external source.
Refer to the operating instructions of the connected equip-
ment.
To change a source name in the display
The source name in the display can be changed to VIDEO, AUX,
or TV, according to the connected equipment.
To select a source name, carry out the following steps.
1 Press the POWER button to turn off the power.
2 Press the POWER button while pressing the VIDEO/AUX
button.
Repeat these steps until the desired source is displayed.
34