Before Your Start Safety Information To reduce the risk of fire, electric shock, or physical injury: • Turn off circuit breaker before • Not compatible with dimmers. installing this fixture. • Not compatible with timing devices. • Suitable for use in damp •...
Page 3
Whats in the Box? Exit Sign Voltage 6000K 120V/277V Wattage Lumens 230LM 2.4W Material Charging Time Title 20 Compliance Fire Resistant LED Heads Frequency 60Hz Power Source Battery Weight 1.65lbs Warranty Dimmable 1 Years...
Page 4
Installation Guide STEP 1 STEP 2 a. Turn off circuit breaker. a. Thread fixture leads through backplate, connect to AC supply b. Remove backplate from fixture wires (black and white for 120V, using bottom slots. red & white for 277V), & secure backplate with screws to J-Box.
Page 5
Installation Guide (Cont.) STEP 3 STEP 4 Finish connecting the battery Align snaps, attach housing to inside the housing. backplate, restore circuit breaker, test light, & let battery charge for 24 hours before using as an emergency light.
Wiring Diagram Remote capable Regular NOTE: NOTE: Unused input lead must be properly Use 18-22AWG standard insulated with wire nut or other wire to connect remote lamp heads. approved method.
Scan the QR code for 2 extra years of protection! 30 Day Return At Sunco, we value our customers and stand by the quality of our products. If you are not satisfied with your purchase, returns are accepted within 30 days of purchase date.
Page 8
Lighting made better. AMERICAN support@sunco.com COMPANY (844) 334-9938 REV1.0...
Need help?
Do you have a question about the EM 2HFL and is the answer not in the manual?
Questions and answers