Advertisement
Quick Links
JKBLJNT-01
DV8 GREEN JK D44 BALL
JOINT KIT (4 PCS)
TOOLS
REQUIRED
– T-50 Torque head socket
– 3mm, 4mm, 5mm Allen head sockets
– Pliers
- Rubber Mallet
– Safety Glasses
WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION
Before you install this kit
instructions, warnings, cautions, and notes contained in
this installation instruction guide. Consult your vehicle
owner's manual for proper disconnection of electrical and
lifting of vehicle if required for installation of this product.
This install may require some technical skills and knowledge
of basic mechanical work. If you do not feel that you are
capable of performing this install please take this product
to a trained professional.
After reading this guide please contact us with any questions
or concerns before installing product.
Customer Service: 855-680-9595
DV8 Offroad is not responsible for any bodily injury or harm
to you or your vehicle as a result of an improper install.
6400 SYCAMORE CANYON BLVD.
RIVERSIDE, CALIFORNIA 92507
855-680-9595
WWW.DV8OFFROAD.COM
SKILL
- Intermediate
– 1(you) to 2 persons
Some skill level required, you
can easily install it by yourself
however additional help will
be useful
— Read and understand all
PRODUCT
INSTALLATION
LEVEL
Proper installation of this kit requires knowledge of the factory
recommended procedures for removal and installation of original
equipment components. We recommend that the factory shop
manual and any special tools needed to service your vehicle be on
hand during the installation. Installation of this kit without proper
knowledge of the factory recommended procedures may affect the
performance of these components and the safety of the vehicle.
• Always wear eye protection when operating power tools. •
Inspect all contents of this package to make sure product is not damaged
and all installation hardware has been included. If parts are missing
from kit, please be prepared to provide the following information:
1.
Name of purchase location
2. Bar Code on side of box
3. Date above bar code
4. Date inside box cover
MANUAL
TIME
REQUIRED
– 2-4 Hours
Time to install these
ball joints take about 2
to 4 hours.
855-680-9595
NEED HELP?
Advertisement
Related Manuals for DV8 OFFROAD JKBLJNT-01
Summary of Contents for DV8 OFFROAD JKBLJNT-01
- Page 1 Name of purchase location Customer Service: 855-680-9595 2. Bar Code on side of box DV8 Offroad is not responsible for any bodily injury or harm 3. Date above bar code to you or your vehicle as a result of an improper install.
- Page 2 INSTALLATION MANUAL STEP : Raise and support the vehicle under the lower control arm. Remove the wheel and tire assembly. On 4WD vehicles remove the drive shaft axle nut. STEP Remove the two bolts securing the disc brake caliper adapter to the steering knuckle.
- Page 3 INSTALLATION MANUAL STEP : Remove the outer tie rod nut from the steering knuckle. Using a suitable tool separate the tie rod from the knuckle. STEP STEP : Remove the lower ball joint retaining nut from the stud and install hand tight.
- Page 4 INSTALLATION MANUAL STEP : Remove the lower ball joint from the control arm. Examine the ball joint mounting area of the control arm and make sure it is clean and free of cracks. STEP STEP : Clean steering knuckle and ball joint tapers.
- Page 5 INSTALLATION MANUAL Install the slotted nut onto lower STEP ball joint stud nut and torque to 102 ft.lbs. (138 Nm). Continue to tighten the slotted nut to the next available slot. Never back off the slotted nut to achieve align- ment with the hole in the stud.
Need help?
Do you have a question about the JKBLJNT-01 and is the answer not in the manual?
Questions and answers