Savant WPB S106V2 Series Quick Reference Manual

Echo and Metropolitan Wireless Keypad Switch (V2) - Quick Reference Guide
Box Contents
(1) Switch (faceplate not included)
(5) Wire Nuts
(2) Double Height Keypad Buttons
for configurable keypads only (WPB, WIB)
(1) Quick Reference Guide (this document)
Specifications
Environmental
Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 90% Relative Humidity (non-condensing)
Location Indoor Use Only
Pollution Degree 2
Dimensions and Weights
Height
WPB, WIB
4.13 in.
(10.50 cm)
WPS, WIS
WPK-xxS105
4.13 in.
(10.50 cm)
WIK-xxS105
7.0 in.
Shipping
(17.78 cm)
Recommended Back Box Depth
Savant's wireless switches require a standard U.S. electrical back
box.
– Recommended - 3.5 in (8.89 cm) deep
– Minimum 2.25 in (5.72 cm) deep
– Type 1 enclosure for control
Mounting
Independently mounted for flush mounting (vertical position only)
Installation
Operating Control Type 1.B action
Software Class A
Power
Input 120V AC at 60 Hz
Power:
See the
Load (Max)
Rated Impulse
2500V
Voltage
Standards
Bluetooth Bluetooth Low Energy (BLE)
Wi-Fi 802.11 a/b/g/n (2.4 and 5 GHz)
Security WPA™, WPA2™, WPA1™ +WPA2™, WEP
Regulatory
FCC Part 15
Safety and
Emissions
Contains FCC ID: PUU-KEYPADSG2A
Contains IC: 10798A-KEYPADSG2A
RoHS Compliant
Minimum Supported Release
da Vinci 10.4
Echo and Metro Wireless Keypad Switch V2 QRG | 009-2228-02
Copyright ©2023 Savant Systems, Inc. | 231212
Width Depth Weight
2.36 in. 1.57 in. .29 lb.
(6.00 cm) (3.99 cm) (0.13 kg)
2.36 in. 1.80 in. .29 lb.
(6.00 cm) (4.57 cm) (0.13 kg)
4.5 in. 3.0 in. .53 lb.
(11.43 cm) (7.62 cm) (0.24 kg)
Derating Table later in this document.
UL
Products
Configurable Keypad Switch
Switch
Dial Keypad
Supported Load Types
Incandescent, Electronic/Magnetic Low
Standard
Voltage, CFL, LED
Configuration
(minimum load size = none)
No Neutral
Not Supported
Configuration
Regulatory
The following statements apply to all Savant Wireless Dimmers,
Switches, and Keypads.
FCC Regulations
15.19. These devices comply with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) These devices may not cause
harmful interference, and (2) these devices must accept any interference
received, including interferences that may cause undesired operation.
15.21. The changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment. 15.105. This equipment has been tested and found to comply
with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a residential environment.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications, However there is no
guarantee that interference will not occur in a particular installation, If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving circuit different from that to which
receiver is connected.
–
Increase the separation between the equipment and the receiver.
– Consult the dealer or experienced radio/TV technician for help.
IC Regulations:
This device contains license-exempt transmitter(s) and receiver(s) that
comply with Innovation, Science and Economic Development Canada's
license-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that
may cause undesired operation
L'émetteur/récepteur exempt de licence contenu dans le présent
appareil est conforme aux CNR d'Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
1. L'appareil ne doit pas produire de brouillage;
2. L'appareil doit accepter tout brouillage radioélectique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
IMPORTANT NOTE:
Not supported as a BLE Gateway.
1 of 4
(WPB-xxS106V2, WIB-xxS106V2)
(WPS-xxS102V2, WIS-xxS102V2)
(WPK-xxS105V2, WIK-xxS105V2)
45 Perseverance Way, Hyannis MA 02601.
savant.com | 508.683.2500