Savant WPS S102-00 Series Quick Reference Manual

Echo Wireless Switch
Quick Reference Guide
The Echo wireless switches are specifically designed to function within a Savant Control system to switch most lighting loads. This
includes incandescent, magnetic and electronic low voltage, CFL, and LED lamps.
The Savant Echo wireless switches replace any standard 120V AC light switch or dimmer. With the addition of the Savant WP3-
xx002 Auxiliary Control, these switches can accommodate most 3-way wiring designs for multi-location control,
Finally, the switches communicates with 802.11 b/g/n wireless network which allow it to be added to the Savant Control system for
complete control of all lighting requirements over the local wireless network.
Box Contents
(1) Switch without faceplate
(2) Mounting Screws
(5) Wire Nuts
(1) Quick Reference Guide (this document)
Products
Switches
Echo Wireless Configurable Keypad (WPB-xxS106-00)
Echo Wireless Switch (WPS-xxS102-00)
Echo Wireless Dial Keypad (WPK-xxS105-00)
Supported Load Types
Standard Incandescent, Electronic/Magnetic Low
Configuration Voltage, CFL, LED
Mounting
Independently mounted (vertical position only)
Installation
Operating
Type 1.B action
Control
Software Class A
Recommended Back Box Depth
All Echo switches require a standard U.S. electrical back box.
– Recommended - 3.5 in (8.89 cm) deep
– Minimum 2.25 in (5.72 cm) deep
– Type 1 enclosure for control
Echo Wireless Switches
009-1758-03 | 190603
Specifications
Environmental
Temperature 32° to 104° F (0° to 40° C)
10% to 90% Relative Humidity
Humidity
(non-condensing)
Location Indoor Use Only
Pollution Degree 2
Dimensions
Height 4.13in (10.50cm) Shipping 7.0in (17.78cm)
Width 2.36in (6.00cm) Shipping 4.5in (11.43cm)
WPB-xxS106 - 1.57in (3.99cm)
WPS-xxS102 - 1.57in (3.99cm)
Depth
WPK-xxS105 - 1.80in (4.60cm)
Shipping 3.0in (7.62cm)
Weight Shipping 0.60lb (0.272kg)
Power
Input 120V AC at 60 Hz
Power:
600W 5A @ 120V AC (See
Load (Max)
Rated Impulse
2500V
Voltage
Standards
Wireless 802.11 b/g/n (2.4GHz only)
Security WPA™, WPA2™, WPA1™ +WPA2™, WEP
Regulatory
FCC Part 15 | UL
Safety and
For more details, see the Regulatory and
Emissions
Safety insert.
Contains FCC
TLZ-CU277B
ID:
Contains IC: 6100A-CU277B
RoHS Compliant
Minimum Supported Release
da Vinci Blueprint 9.0
1 of 4
Derating
Copyright © 2018 Savant Systems, LLC
Table)