Page 1
9100 Series 9100 Series completed product as it was designed. Top Assembly Instructions Part List Support Top Support Top 2 pcs. 1 pc. Hardware List M6x30 Head Cap Bolt 6 pcs. (+1 extra) Home Styles Consumer Assistance: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
Page 2
9100 Series Top Assembly Instructions STEP 1 Put back end of Top Supports (V) into the pre-drilled holes in unit and attach with Head Cap Bolts. Head Cap Bolt STEP 2 Place Top (W) onto the unit and then tighten all Head Cap Bolts.
We have taken great care in the design of this product and request that you carefully and strictly 9200 Series follow our assembly instructions to ensure a Top Assembly Instructions completed product as it was designed. Part List 1 Pc. Home Styles Consumer Assistance: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
Page 4
9200 Series Top Assembly Instructions Steel Plate Connector Flat Washer Spring Washer Head Cap Bolt (short) Figure 1 STEP 1 Remove the drawers from the unit. Place Top (W) onto the unit and attach it to the body with the Steel Plate Connectors, Flat Washers, Spring Washers and Head Cap Bolts (short).
Pull Handle 1 pc. 12 pcs. (+2extra) 1 pc. 4 pcs. (+1 extra) 3 pcs. 2 pcs. (+1 extra) 4 pcs. Tools required for assembly : Phillips screwdriver Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319 servicedesk@homestyles-furniture.com Revised date : 30Oct2012...
Page 6
Assembly Instructions 2/3 IMPORTANT Do not tighten up all the screws until each part is properly assembled. You should keep Hex Wrench in the safe place as you may need to tighten up the Head Cap Bolts in the future. STEP 1 Attach four Casters to the Base (J) with Wood Screws.
Page 7
Assembly Instructions 3/3 Head Cap Bolt STEP 4 Attach the Side Rack (R) to the Side Panel (B) with the Head Cap Bolt. Attach the Brush Chrome Pipes (U) to the pre-drilled holes of Side Rack (R). Attach the Base Rack (T) to the Side Rack (R). Attach the Side Rack (S) to the Side Panel (B), using Head Cap Bolt.
Page 8
Drawer (N) UNIT PART LIST HARDWARE LIST Wood Screw / ” Pull Handle Side Part (for Bottom Part) 2 pcs. 2 pcs. 12 pcs. Front Part Back Part 2 pcs. 2 pcs. Wood Screw 1” Bottom Machine Screw Side Part (for Side Part) 2 pcs.
Page 9
PART LIST HARDWARE LIST Head Cap Bolt Top Support 6 pcs. (+1 extra) 1 pcs. 2 pcs. The Top Support (part X) and Head Cap Bolts Attention ! are particular parts required for 9100 series only, This Top can be used for both kitchen cart they are not necessary for 9200 series.
Need help?
Do you have a question about the 88 9100 102CN and is the answer not in the manual?
Questions and answers