Assembly Instruction 2 / 6 IMPORTANT * Do not tighten up all the screws and bolts until each part is properly assembled. * You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * Use a soft cloth between these parts and the fl...
Page 3
Assembly Instruction 3 / 6 STEP 3 Attach unit to Base (J). Attach Attach Side Panel (A) to unit with Head Cap Bolts. Attach (see Figure 2) (see F Figure 2 Head Cap Bolt Head Cap Bolt STEP 4 Slide Back Panels (E) into the unit. Attach Back Stretcher (G) and Front Piece (H) to the unit with Head Cap Bolts.
Page 4
Assembly Instruction 4 / 6 Head Cap Bolt STEP 6 Assemble Handle Arms (L) to Side Panel (B) with Head Cap Bolts. Slide Round Arm (M) into place. STEP 7 Insert Adjustable Pins into side panels and middle panels at the desired level and slide Shelves (K ) into place.
Assembly Instruction 5 / 6 Drawer (T) Figure 1 MAKE SURE ROLLER IS ON THE BACK STEP 1 Attach T1 to T3 and T4, using a Phillips screwdriver and long wood screws (4X), tighten halfway. Figure 2 Attach T2 to T3 and T4 using long wood screws (4X), tighten halfway.
Page 6
Assembly Instruction 6 / 6 Drawer (U) Figure 1 STEP 1 Attach U1 to U3 and U4, using MAKE SURE ROLLER a Phillips screwdriver and IS ON THE BACK long wood screws (4X), tighten halfway. Figure 2 Attach U2 to U3 and U4 using long wood screws (4X), tighten halfway.
9100 Series 9100 Series completed product as it was designed. Top Assembly Instructions Part List Support Top Support Top 2 pcs. 1 pc. Hardware List M6x30 Head Cap Bolt 6 pcs. (+1 extra) Home Styles Consumer Assistance: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
Page 8
9100 Series Top Assembly Instructions STEP 1 Put back end of Top Supports (V) into the pre-drilled holes in unit and attach with Head Cap Bolts. Head Cap Bolt STEP 2 Place Top (W) onto the unit and then tighten all Head Cap Bolts.
Page 9
We have taken great care in the design of this product and request that you carefully and strictly 9200 Series follow our assembly instructions to ensure a Top Assembly Instructions completed product as it was designed. Part List 1 Pc. Home Styles Consumer Assistance: www.homestyles-furniture.com, servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319...
Page 10
9200 Series Top Assembly Instructions Steel Plate Connector Flat Washer Spring Washer Head Cap Bolt (short) Figure 1 STEP 1 Remove the drawers from the unit. Place Top (W) onto the unit and attach it to the body with the Steel Plate Connectors, Flat Washers, Spring Washers and Head Cap Bolts (short).
Need help?
Do you have a question about the 88 9100 006CN and is the answer not in the manual?
Questions and answers