Cross Cut Force - GRAPHTEC CE8000-130AP User Manual

4.4

Cross Cut Force

Adjust the blade force when cross cutting.
The setting range of Cross Cut force is 1 to 38. The force becomes strong when the set value is large.
If the medium is thin, set the setting value to a small value, if it is thick, set it large.
Supplement
This setting will be saved even if the power is shut off.
Operation
1.
Press the [ ] icon.
2.
Press the [MEDIA].
3.
Press the [ ] icon three times.
4.
Press the [CROSS CUT FORCE].
5.
Specify the setting value using the [ ] [ ] icon or the [
Supplement
You can set the range between 1 and 38.
6.
Confirm the setting and press the [OK].
7.
Press the [ ] icon.
It will return to HOME screen.
] icon.
4-14