Advertisement
Quick Links
Advertisement
Related Manuals for GGM gastro SMFC
Summary of Contents for GGM gastro SMFC
- Page 1 PEANUT MILL USER MANUAL Model Number: SMFC SAVE THESE INSTRUCTIONS!
- Page 2 INTRODUCTION Thanks for using this style Peanut Mill. The appliance can be operated easier and safer than other similar appliance. This instruction manual gives the customer all the necessary information about the appliance and the manufacturing standards applied, as well as all instructions for use and maintenance so that the appliance can be used correctly maintaining its efficiency in time.
- Page 3 Product explosion diagram Part # Description Part # Description Motor Adjusting Hand wheel Sauce Outlet Locking Nut Sealing Ring Food Tray Coupling Material Controller Casing Grinding Wheel Static Seat Grinding Wheel Moving Seat Tightening Bolt Fastening Screw Countersunk Screw Moving Grinding Wheel Latch Static Grinding Wheel Positional Screw...
-
Page 4: Operating Intructions
OPERATING INTRUCTIONS Step 1: Clean the machine before using it. Step 2: Apply edible oil to the contact surface of the two grinding wheels before use. Step 3: Select the correct material controller. Grinding sesame seeds uses Material Controller with control pieces, while grinding large granular materials such as peanuts does not use a material control device. - Page 5 Step 6: Adjust the handle counterclockwise (fine grinding) until you hear a slight friction sound between the two grinding wheels, indicating that the two grinding wheels have come into contact. Then start feeding. Counterclockwise Step 7: After grinding for 2 minutes, observe if the oil sauce is too hot. If there is smoke coming out of the sauce outlet, slight adjust the handle clockwise.
-
Page 6: Maintenance
Maintenance 1. Static grinding wheel replacement: Remove the machine cover, loosen the fastening screws on the circumference of the grinding wheel seat, and then loosen the three nuts on the grinding wheel seat. Remove the sunk head screws to replace them. During installation, place the three butterfly spring pads at the three holes, place the stationary grinding wheel, and install the three countersunk screws.
Need help?
Do you have a question about the SMFC and is the answer not in the manual?
Questions and answers
hoe maak ik de machine schoon, Moet ik dat middenstuk demonteren?
To clean the GGM gastro SMFC machine, follow these steps:
1. After grinding, adjust the handle clockwise and let the machine run for about 3 minutes before turning off the power.
2. Do not open the machine cover until it has completely stopped.
3. Open the upper cover and clean the sesame paste inside the shell and grinding wheel teeth.
4. Do not rinse with water. If water is used, ensure the grinding wheel is completely dry before the next use, or use a hair dryer to dry it.
There is no mention of disassembling the middle section specifically for cleaning.
This answer is automatically generated