OptConnect mylo2 Quick Start Manual page 9

6. Configure your equipment for Static IP
Skip this step if you do not need to initiate a connection
from your host to your equipment through mylo2
• Set your equipment as follows:
IP address
Subnet mask
Gateway
DNS server 1
DNS server 2
• Special case for ATMs
• Follow the instructions immediately above, but set
your ATM's IP Address to 192.168.1.91
• If you require outbound RMS, enter your RMS server's
protocols, and TLS encryption settings exactly as
your processor instructs. For proper security, enable
SSL Certificate Verification.
192.168.1.11
255.255.255.0
192.168.1.90
192.168.1.90
8.8.8.8