OptConnect mylo2 Quick Start Manual page 7

4. Maximize signal strength and quality
Your mylo2 may work well at this point. However, this step
is strongly recommended to avoid potential future issues.
• Log in to the OptConnect Summit portal at
https://summit3.optconnect.com/login
•
• Click Total Devices link.
• Locate serial number on mylo2 and scroll to find it or type
it in Search/Filter box and press Enter.
• In the On-Demand Info section, click the mylo2 link to
view signal strength
• Adjust antenna position by an inch or two.
• Click Refresh on Demand Info button. Important: mylo2
can take 15 seconds to update.
• Repeat steps 5-6 until signal strength and quality are
maximized.
• If it is not possible to maximize both signal strength and
quality, maximize quality.
• Recommended: enter your device identification and
description.