OptConnect mylo2 Quick Start Manual page 11

8. Identify remote access IP address
Skip to step 11 if you do not need to initiate a connection
from your host to your equipment through mylo2.
• Look up the IP address of your mylo2 in Summit or
contact our Customer Care Center at 877.678.3343.
• Ensure your equipment is configured for a static IP
address (see Step 6).
• For equipment other than ATMs:
• If you have more than one piece of equipment,
configure the second piece of equipment as directed
in Step 6 with an address of 192.168.1.12
• Continue to Step 9
• For ATMs:
• Configure your ATM to communicate to your RMS
server's hostname/IP address and port number.
(Note: this may be different from other OptConnect
Products.)
• Configure your RMS host system to contact your
ATM using mylo2's IP address and the standard
OptConnect RMS ports.