Advertisement
Quick Links
Advertisement
Related Manuals for OptConnect mylo2
Summary of Contents for OptConnect mylo2
- Page 1 Quick Start Guide tenacious connectivity magnetic personality...
- Page 2 The OptConnect mylo2 is an LTE Category M1 cellular router perfectly suited to ATMs, point of sales systems, smart safes, and sensor applications. The mylo2 features a magnetic base that can attach to any metal surface. No brackets or tape needed. Every mylo2 comes with OptConnect managed wireless services and a lifetime license to Summit –...
- Page 3 Simple steps to place, plug and play 1. Identify mylo2 and its included accessories. 2. Position the antenna. 3. Place mylo2 and connect antenna & power. 4. Maximize signal strength and quality. 5. Configure your equipment for DHCP. 6. Configure your equipment for Static IP.
- Page 4 1. Identify mylo2 and its accessories • The mylo2 cellular router • Antenna • Ethernet cable • Power adapter IMPORTANT Use only the included power adapter to maintain warranty coverage. Keep the magnets away from exposed electronics. Your equipment’s IP settings are critical. See the steps on...
-
Page 5: Position The Antenna
2. Position the antenna • Avoid placing the antenna inside equipment constructed entirely or mostly of metal. • Position the antenna’s magnetic base on a metal surface 3-5 inches from any edge; location on a metal surface can improve signal strength. •... - Page 6 • Connect both antenna leads to mylo2 and fully tighten. • Route power adapter’s cord from power source to mylo2. • Connect power cord to mylo2; ensure the green LED next to the power port glows. • After 10-60 seconds, ensure the middle green LED glows or flashes.
- Page 7 • • Click Total Devices link. • Locate serial number on mylo2 and scroll to find it or type it in Search/Filter box and press Enter. • In the On-Demand Info section, click the mylo2 link to view signal strength •...
- Page 8 TLS encryption settings exactly as your processor instructs. (Note: this may be different from other OptConnect products.) • IMPORTANT – OptConnect strongly recommends that you enable TLS encryption and SSL Certificate Verification on your ATM to prevent attacks such as “man in the middle.” Enabling SSL Certificate Verification may require later ATM software versions from your equipment’s manufacture.
- Page 9 6. Configure your equipment for Static IP Skip this step if you do not need to initiate a connection from your host to your equipment through mylo2 • Set your equipment as follows: 192.168.1.11 IP address 255.255.255.0 Subnet mask Gateway 192.168.1.90...
- Page 10 7. Connect Ethernet cable and test • Connect the ethernet cable to your equipment and to mylo2. Ensure the green LED next to the ethernet port glows. • Restart your equipment or cause it to refresh its network environment. • Perform a test with your equipment.
- Page 11 Skip to step 11 if you do not need to initiate a connection from your host to your equipment through mylo2. • Look up the IP address of your mylo2 in Summit or contact our Customer Care Center at 877.678.3343.
- Page 12 Contact port 192.168.1.11........192.168.1.12........2xxx • Ex: directing your browser to <mylo2 IP address> : 2443 establishes an https session on port 443 with your equipment at IP address 192.168.1.12, the 2nd device in the table above. • mylo2 is pre-configured for remote access to two static IP clients as per the table above.
- Page 13 Customer Care Center at 877.678.3343 to install our free software VPN client or to discuss other options. If this mylo2 is part of a larger portfolio of OptConnect devices, your company is already using credentials to remotely access your equipment. You do not need to take...
- Page 14 11. Manage your OptConnect Device Your mylo2 includes a lifetime license to Summit to help you manage your cellular devices. Log in at https://summit3.optconnect.com/login or contact our Customer Care Center at 877.678.3343...
- Page 15 How do I log in to mylo2? There is no login for mylo2. OptConnect manages all aspects of mylo2 as part of our managed wireless services. How do I change mylo2’s IP address, firewall settings, etc.? Each mylo2 you receive is configured to your specifications before it arrives.
- Page 16 Thousands of satisfied customers trust OptConnect as a leading provider of managed IoT services and headache-free cellular connectivity, with award-winning products and top-rated customer service. Let us show you why! OptConnect.com 877.678.3343...
Need help?
Do you have a question about the mylo2 and is the answer not in the manual?
Questions and answers